Subversion Repositories a-z80

# file: wave.sv

#

# (c) Copyright 2008 - 2010 Xilinx, Inc. All rights reserved.

#

# This file contains confidential and proprietary information

# of Xilinx, Inc. and is protected under U.S. and

# international copyright and other intellectual property

# laws.

#

# DISCLAIMER

# This disclaimer is not a license and does not grant any

# rights to the materials distributed herewith. Except as

# otherwise provided in a valid license issued to you by

# Xilinx, and to the maximum extent permitted by applicable

# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND

# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES

# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING

# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-

# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and

# (2) Xilinx shall not be liable (whether in contract or tort,

# including negligence, or under any other theory of

# liability) for any loss or damage of any kind or nature

# related to, arising under or in connection with these

# materials, including for any direct, or any indirect,

# special, incidental, or consequential loss or damage

# (including loss of data, profits, goodwill, or any type of

# loss or damage suffered as a result of any action brought

# by a third party) even if such damage or loss was

# reasonably foreseeable or Xilinx had been advised of the

# possibility of the same.

#

# CRITICAL APPLICATIONS

# Xilinx products are not designed or intended to be fail-

# safe, or for use in any application requiring fail-safe

# performance, such as life-support or safety devices or

# systems, Class III medical devices, nuclear facilities,

# applications related to the deployment of airbags, or any

# other applications that could lead to death, personal

# injury, or severe property or environmental damage

# (individually and collectively, "Critical

# Applications"). Customer assumes the sole risk and

# liability of any use of Xilinx products in Critical

# Applications, subject only to applicable laws and

# regulations governing limitations on product liability.

#

# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS

# PART OF THIS FILE AT ALL TIMES.

#

# Get the windows set up

#

if {[catch {window new WatchList -name "Design Browser 1" -geometry 1054x819+536+322}] != ""} {

    window geometry "Design Browser 1" 1054x819+536+322

}

window target "Design Browser 1" on

browser using {Design Browser 1}

browser set \

    -scope nc::clock_tb

browser yview see nc::clock_tb

browser timecontrol set -lock 0

if {[catch {window new WaveWindow -name "Waveform 1" -geometry 1010x600+0+541}] != ""} {

    window geometry "Waveform 1" 1010x600+0+541

}

window target "Waveform 1" on

waveform using {Waveform 1}

waveform sidebar visibility partial

waveform set \

    -primarycursor TimeA \

    -signalnames name \

    -signalwidth 175 \

    -units ns \

    -valuewidth 75

cursor set -using TimeA -time 0

waveform baseline set -time 0

waveform xview limits 0 20000n

#

# Define signal groups

#

catch {group new -name {Output clocks} -overlay 0}

catch {group new -name {Status/control} -overlay 0}

catch {group new -name {Counters} -overlay 0}

set id [waveform add -signals [list {nc::clock_tb.CLK_IN1}]]

group using {Output clocks}

group set -overlay 0

group set -comment {}

group clear 0 end

group insert \

    {clock_tb.dut.clk[1]} \

    {clock_tb.dut.clk[2]}

group using {Counters}

group set -overlay 0

group set -comment {}

group clear 0 end

group insert \

    {clock_tb.dut.counter[1]} \

    {clock_tb.dut.counter[2]}

group using {Status/control}

group set -overlay 0

group set -comment {}

group clear 0 end

group insert \

   {nc::clock_tb.LOCKED}

set id [waveform add -signals [list {nc::clock_tb.COUNT} ]]

set id [waveform add -signals [list {nc::clock_tb.test_phase} ]]

waveform format $id -radix %a

set groupId [waveform add -groups {{Input clocks}}]

set groupId [waveform add -groups {{Output clocks}}]

set groupId [waveform add -groups {{Status/control}}]

set groupId [waveform add -groups {{Counters}}]