Subversion Repositories a-z80

//============================================================================

// Sinclair ZX Spectrum ULA

//

//  Copyright (C) 2014-2016  Goran Devic

//

//  This program is free software; you can redistribute it and/or modify it

//  under the terms of the GNU General Public License as published by the Free

//  Software Foundation; either version 2 of the License, or (at your option)

//  any later version.

//

//  This program is distributed in the hope that it will be useful, but WITHOUT

//  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

//  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

//  more details.

//

//  You should have received a copy of the GNU General Public License along

//  with this program; if not, write to the Free Software Foundation, Inc.,

//  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

//============================================================================

module ula

(

    //-------- Clocks and reset -----------------

    input wire CLOCK_27,            // Input clock 27 MHz

    input wire CLOCK_24,            // Input clock 24 MHz

    input wire turbo,               // Turbo speed (3.5 MHz x 2 = 7.0 MHz)

    output wire clk_vram,

    input wire nreset,              // Active low reset

    output wire locked,             // PLL is locked signal

    //-------- CPU control ----------------------

    output wire clk_cpu,            // Generates CPU clock of 3.5 MHz

    output wire vs_nintr,           // Generates a vertical retrace interrupt

    //-------- Address and data buses -----------

    input wire [15:0] A,            // Input address bus

    input wire [7:0] D,             // Input data bus

    output wire [7:0] ula_data,     // Output data

    input wire io_we,               // Write enable to data register through IO

    output wire [12:0] vram_address,// ULA video block requests a byte from the video RAM

    input wire [7:0] vram_data,     // ULA video block reads a byte from the video RAM

    //-------- PS/2 Keyboard --------------------

    input wire PS2_CLK,

    input wire PS2_DAT,

    output wire pressed,

    //-------- Audio (Tape player) --------------

    inout wire I2C_SCLK,

    inout wire I2C_SDAT,

    output wire AUD_XCK,

    output wire AUD_ADCLRCK,

    output wire AUD_DACLRCK,

    output wire AUD_BCLK,

    output wire AUD_DACDAT,

    input wire AUD_ADCDAT,

    output reg beeper,

    //-------- VGA connector --------------------

    output wire [3:0] VGA_R,

    output wire [3:0] VGA_G,

    output wire [3:0] VGA_B,

    output reg VGA_HS,

    output reg VGA_VS

);

`default_nettype none

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// Instantiate PLL and clocks block

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wire clk_pix;                       // VGA pixel clock (25.175 MHz)

wire clk_ula;                       // ULA master clock (14 MHz)

assign clk_vram = clk_pix;

pll pll_( .locked(locked), .inclk0(CLOCK_27), .c0(clk_pix), .c1(clk_ula) );

clocks clocks_( .* );

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// The border color index

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

reg [2:0] border;                   // Border color index value

always @(posedge clk_cpu)

begin

    if (A[0]==0 && io_we==1) begin

        border <= D[2:0];

        // EAR output (produces a louder sound)

        pcm_outl[14] <= D[4];       // Why [14] and not [15]? Less loud.

        pcm_outr[14] <= D[4];

        // MIC (echoes the input)

        pcm_outl[13] <= D[3];

        pcm_outr[13] <= D[3];

        // Let us hear the tape loading!

        pcm_outl[12] <= pcm_inl[14] | pcm_inr[14];

        pcm_outr[12] <= pcm_inl[14] | pcm_inr[14];

        // Let us see the tape loading!

        beep <= (pcm_inl[14] | pcm_inr[14]) ^ D[4] ^ D[3];

    end

end

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// Instantiate audio interface

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wire audio_done;

wire audio_error;

i2c_loader i2c_loader_( .CLK(CLOCK_24), .nRESET(nreset), .I2C_SCL(I2C_SCLK), .I2C_SDA(I2C_SDAT), .IS_DONE(audio_done), .IS_ERROR(audio_error) );

assign AUD_DACLRCK = AUD_ADCLRCK;

wire [15:0] pcm_inl;

wire [15:0] pcm_inr;

reg  [15:0] pcm_outl;

reg  [15:0] pcm_outr;

i2s_intf i2s_intf_( .CLK(CLOCK_24), .nRESET(nreset),

    .PCM_INL(pcm_inl[15:0]), .PCM_INR(pcm_inr[15:0]), .PCM_OUTL(pcm_outl[15:0]), .PCM_OUTR(pcm_outr[15:0]),

    .I2S_MCLK(AUD_XCK), .I2S_LRCLK(AUD_ADCLRCK), .I2S_BCLK(AUD_BCLK), .I2S_DOUT(AUD_DACDAT), .I2S_DIN(AUD_ADCDAT) );

// Show the beeper visually by dividing the frequency with some factor to generate LED blinks

reg beep;                           // Beeper latch

reg [6:0] beepcnt;                  // Beeper counter

always @(posedge beep)

begin

    beepcnt <= beepcnt - '1;

    if (beepcnt==0) beeper <= ~beeper;

end

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// Instantiate ULA's video subsystem

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

video video_( .* );

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// Instantiate keyboard support

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wire [7:0] scan_code;

wire scan_code_ready;

wire scan_code_error;

ps2_keyboard ps2_keyboard_( .*, .clk(clk_cpu) );

wire [4:0] key_row;

zx_keyboard zx_keyboard_( .*, .clk(clk_cpu) );

always_comb

begin

    ula_data = 8'hFF;

    // Regular IO at every odd address: line-in and keyboard

    if (A[0]==0) begin

        ula_data = { 1'b1, pcm_inl[14] | pcm_inr[14], 1'b1, key_row[4:0] };

    end

end

endmodule