URL
https://opencores.org/ocsvn/a-z80/a-z80/trunk
[/] [a-z80/] [trunk/] [tools/] [zmac/] [readme.txt] - Blame information for rev 3
Go to most recent revision |
Details |
Compare with Previous |
View Log
Line No. |
Rev |
Author |
Line |
1 |
3 |
gdevic |
Several things are happening here:
|
2 |
|
|
|
3 |
|
|
1. Generation of Z80 test code for ModelSim and FPGA at the "host/basic" level:
|
4 |
|
|
|
5 |
|
|
Run the batch file "make_fpga.bat" generate "fpga.hex" from a test source file.
|
6 |
|
|
This file is included by the host/basic/ram.v module into the FPGA image.
|
7 |
|
|
|
8 |
|
|
2. Generation of Z80 test code for the toplevel A-Z80 CPU ModelSim at the
|
9 |
|
|
"cpu/toplevel/simulation/modelsim" level:
|
10 |
|
|
|
11 |
|
|
Run the batch file "make_modelsim.bat" to generate this test file.
|
12 |
|
|
|
13 |
|
|
/cpu/toplevel/tb_ram.sv is a ModelSim test bench for the toplevel A-Z80 block.
|
14 |
|
|
There is no "host board" at that level but ModelSim's UART device will capture
|
15 |
|
|
and print any output.
|
16 |
|
|
|
17 |
|
|
"ram.hexdump" contains the test code that provides UART print functions as well
|
18 |
|
|
as INT/NMI handlers used to test interrupts.
|
19 |
|
|
|
20 |
|
|
Currently tested sources which should work in both of those use cases:
|
21 |
|
|
|
22 |
|
|
"hello_world.asm" - simply test UART print out functions
|
23 |
|
|
|
24 |
|
|
"test.daa.asm" - runs DAA instruction on all values. The output should be
|
25 |
|
|
ASCII-identical to the output of the DAA tests at tools/dongle/daa
|
26 |
|
|
|
27 |
|
|
"test.neg.asm" - runs NEG instruction on all values. The output should be
|
28 |
|
|
ASCII-identical to the output of the NEG tests at tools/dongle/neg
|
29 |
|
|
|
30 |
|
|
"zexdoc.asm" - modified ZEXDOC test program
|
© copyright 1999-2024
OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.