OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] [vlog/] [amber25/] [a25_coprocessor.v] - Blame information for rev 35

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 16 csantifort
//////////////////////////////////////////////////////////////////
2
//                                                              //
3
//  Co-processor module for Amber 25 Core                       //
4
//                                                              //
5
//  This file is part of the Amber project                      //
6
//  http://www.opencores.org/project,amber                      //
7
//                                                              //
8
//  Description                                                 //
9
//  Co_processor 15 registers and control signals               //
10
//  Author(s):                                                  //
11
//      - Conor Santifort, csantifort.amber@gmail.com           //
12
//                                                              //
13
//////////////////////////////////////////////////////////////////
14
//                                                              //
15
// Copyright (C) 2011 Authors and OPENCORES.ORG                 //
16
//                                                              //
17
// This source file may be used and distributed without         //
18
// restriction provided that this copyright statement is not    //
19
// removed from the file and that any derivative work contains  //
20
// the original copyright notice and the associated disclaimer. //
21
//                                                              //
22
// This source file is free software; you can redistribute it   //
23
// and/or modify it under the terms of the GNU Lesser General   //
24
// Public License as published by the Free Software Foundation; //
25
// either version 2.1 of the License, or (at your option) any   //
26
// later version.                                               //
27
//                                                              //
28
// This source is distributed in the hope that it will be       //
29
// useful, but WITHOUT ANY WARRANTY; without even the implied   //
30
// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      //
31
// PURPOSE.  See the GNU Lesser General Public License for more //
32
// details.                                                     //
33
//                                                              //
34
// You should have received a copy of the GNU Lesser General    //
35
// Public License along with this source; if not, download it   //
36
// from http://www.opencores.org/lgpl.shtml                     //
37
//                                                              //
38
//////////////////////////////////////////////////////////////////
39
 
40
 
41
module a25_coprocessor
42
(
43
input                       i_clk,
44 35 csantifort
input                       i_core_stall,     // stall all stages of the Amber core at the same time
45 16 csantifort
input       [2:0]           i_copro_opcode1,
46
input       [2:0]           i_copro_opcode2,
47
input       [3:0]           i_copro_crn,      // Register Number 
48
input       [3:0]           i_copro_crm,
49
input       [3:0]           i_copro_num,
50
input       [1:0]           i_copro_operation,
51
input       [31:0]          i_copro_write_data,
52
 
53
input                       i_fault,          // high to latch the fault address and status
54
input       [7:0]           i_fault_status,
55
input       [31:0]          i_fault_address,  // the address that caused the fault
56
 
57
output reg  [31:0]          o_copro_read_data,
58
output                      o_cache_enable,
59
output                      o_cache_flush,
60
output      [31:0]          o_cacheable_area
61
);
62
 
63
// Bit 0 - Cache on(1)/off
64
// Bit 1 - Shared (1) or seperate User/Supervisor address space
65
// Bit 2 - address monitor mode(1)
66
reg [2:0]  cache_control = 3'b000;
67
 
68
// Bit 0 - 2MB memory from 0 to 0x01fffff cacheable(1)/not cachable
69
// Bit 1 - next 2MB region etc.
70
reg [31:0] cacheable_area = 32'h0;
71
 
72
// Marks memory regions as read only so writes are ignored by the cache
73
// Bit 0 - 2MB memory from 0 to 0x01fffff updateable(1)/not updateable
74
// Bit 1 - next 2MB region etc.
75
reg [31:0] updateable_area = 32'h0;
76
 
77
// Accesses to a region with a flag set in this register cause the
78
// cache to flush
79
// Bit 0 - 2MB memory from 0 to 0x01fffff
80
// Bit 1 - next 2MB region etc.
81
reg [31:0] disruptive_area = 32'h0;
82
 
83
 
84
reg [7:0]  fault_status  = 'd0;
85
reg [31:0] fault_address = 'd0;  // the address that caused the fault
86
 
87
wire       copro15_reg1_write;
88
 
89
 
90
// ---------------------------
91
// Outputs
92
// ---------------------------
93
assign o_cache_enable   = cache_control[0];
94
assign o_cache_flush    = copro15_reg1_write;
95
assign o_cacheable_area = cacheable_area;
96
 
97
// ---------------------------
98
// Capture an access fault address and status
99
// ---------------------------
100
always @ ( posedge i_clk )
101 35 csantifort
    if ( !i_core_stall )
102 16 csantifort
        begin
103
        if ( i_fault )
104
            begin
105
 
106
            `ifdef A25_COPRO15_DEBUG
107
            $display ("Fault status  set to 0x%08x", i_fault_status);
108
            $display ("Fault address set to 0x%08x", i_fault_address);
109
            `endif
110
            fault_status    <= i_fault_status;
111
            fault_address   <= i_fault_address;
112
            end
113
        end
114
 
115
 
116
// ---------------------------
117
// Register Writes
118
// ---------------------------
119
always @ ( posedge i_clk )
120 35 csantifort
    if ( !i_core_stall )
121 16 csantifort
        begin
122
        if ( i_copro_operation == 2'd2 )
123
            case ( i_copro_crn )
124
                4'd2: cache_control   <= i_copro_write_data[2:0];
125
                4'd3: cacheable_area  <= i_copro_write_data[31:0];
126
                4'd4: updateable_area <= i_copro_write_data[31:0];
127
                4'd5: disruptive_area <= i_copro_write_data[31:0];
128
            endcase
129
        end
130
 
131
// Flush the cache
132 35 csantifort
assign copro15_reg1_write = !i_core_stall && i_copro_operation == 2'd2 && i_copro_crn == 4'd1;
133 16 csantifort
 
134
 
135
// ---------------------------
136
// Register Reads   
137
// ---------------------------
138
always @ ( posedge i_clk )
139 35 csantifort
    if ( !i_core_stall )
140 16 csantifort
        case ( i_copro_crn )
141
            // ID Register - [31:24] Company id, [23:16] Manuf id, [15:8] Part type, [7:0] revision
142
            4'd0:    o_copro_read_data <= 32'h4156_0300;
143
            4'd2:    o_copro_read_data <= {29'd0, cache_control};
144
            4'd3:    o_copro_read_data <= cacheable_area;
145
            4'd4:    o_copro_read_data <= updateable_area;
146
            4'd5:    o_copro_read_data <= disruptive_area;
147
            4'd6:    o_copro_read_data <= {24'd0, fault_status };
148
            4'd7:    o_copro_read_data <= fault_address;
149
            default: o_copro_read_data <= 32'd0;
150
        endcase
151
 
152
 
153
 
154
// ========================================================
155
// Debug code - not synthesizable
156
// ========================================================
157
 
158
`ifdef A25_COPRO15_DEBUG
159
//synopsys translate_off
160
reg [1:0]  copro_operation_d1;
161
reg [3:0]  copro_crn_d1;
162
 
163
always @( posedge i_clk )
164 35 csantifort
    if ( !i_core_stall )
165 16 csantifort
        begin
166
        copro_operation_d1  <= i_copro_operation;
167
        copro_crn_d1        <= i_copro_crn;
168
        end
169
 
170
always @( posedge i_clk )
171 35 csantifort
    if ( !i_core_stall )
172 16 csantifort
        begin
173
        if ( i_copro_operation == 2'd2 )  // mcr
174
            case ( i_copro_crn )
175
                4'd 1: begin `TB_DEBUG_MESSAGE $display ("Write 0x%08h to   Co-Pro 15 #1, Flush Cache", i_copro_write_data); end
176
                4'd 2: begin `TB_DEBUG_MESSAGE $display ("Write 0x%08h to   Co-Pro 15 #2, Cache Control", i_copro_write_data); end
177
                4'd 3: begin `TB_DEBUG_MESSAGE $display ("Write 0x%08h to   Co-Pro 15 #3, Cacheable area", i_copro_write_data); end
178
                4'd 4: begin `TB_DEBUG_MESSAGE $display ("Write 0x%08h to   Co-Pro 15 #4, Updateable area", i_copro_write_data); end
179
                4'd 5: begin `TB_DEBUG_MESSAGE $display ("Write 0x%08h to   Co-Pro 15 #5, Disruptive area", i_copro_write_data); end
180
            endcase
181
 
182
        if ( copro_operation_d1 == 2'd1 ) // mrc
183
            case ( copro_crn_d1 )
184
                4'd 0: begin `TB_DEBUG_MESSAGE $display ("Read  0x%08h from Co-Pro 15 #0, ID Register", o_copro_read_data); end
185
                4'd 2: begin `TB_DEBUG_MESSAGE $display ("Read  0x%08h from Co-Pro 15 #2, Cache control", o_copro_read_data); end
186
                4'd 3: begin `TB_DEBUG_MESSAGE $display ("Read  0x%08h from Co-Pro 15 #3, Cacheable area", o_copro_read_data); end
187
                4'd 4: begin `TB_DEBUG_MESSAGE $display ("Read  0x%08h from Co-Pro 15 #4, Updateable area", o_copro_read_data); end
188
                4'd 5: begin `TB_DEBUG_MESSAGE $display ("Read  0x%08h from Co-Pro 15 #4, Disruptive area", o_copro_read_data); end
189
                4'd 6: begin `TB_DEBUG_MESSAGE $display ("Read  0x%08h from Co-Pro 15 #6, Fault Status Register", o_copro_read_data); end
190
                4'd 7: begin `TB_DEBUG_MESSAGE $display ("Read  0x%08h from Co-Pro 15 #7, Fault Address Register", o_copro_read_data); end
191
            endcase
192
    end
193
//synopsys translate_on
194
`endif
195
 
196
endmodule
197
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.