Subversion Repositories neo430

-- #################################################################################################

-- #  << NEO430 - Processor Top Entity using resolved signal types (std_logic) only >>             #

-- # ********************************************************************************************* #

-- # BSD 3-Clause License                                                                          #

-- #                                                                                               #

-- # Copyright (c) 2020, Stephan Nolting. All rights reserved.                                     #

-- #                                                                                               #

-- # Redistribution and use in source and binary forms, with or without modification, are          #

-- # permitted provided that the following conditions are met:                                     #

-- #                                                                                               #

-- # 1. Redistributions of source code must retain the above copyright notice, this list of        #

-- #    conditions and the following disclaimer.                                                   #

-- #                                                                                               #

-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     #

-- #    conditions and the following disclaimer in the documentation and/or other materials        #

-- #    provided with the distribution.                                                            #

-- #                                                                                               #

-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  #

-- #    endorse or promote products derived from this software without specific prior written      #

-- #    permission.                                                                                #

-- #                                                                                               #

-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   #

-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               #

-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    #

-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     #

-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #

-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    #

-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     #

-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  #

-- # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            #

-- # ********************************************************************************************* #

-- # The NEO430 Processor - https://github.com/stnolting/neo430                                    #

-- #################################################################################################

library ieee;

use ieee.std_logic_1164.all;

use ieee.numeric_std.all;

library neo430;

use neo430.neo430_package.all;

entity neo430_top_std_logic is

  generic (

    -- general configuration --

    CLOCK_SPEED  : natural := 100000000; -- main clock in Hz

    IMEM_SIZE    : natural := 4*1024; -- internal IMEM size in bytes, max 48kB (default=4kB)

    DMEM_SIZE    : natural := 2*1024; -- internal DMEM size in bytes, max 12kB (default=2kB)

    -- additional configuration --

    USER_CODE    : std_logic_vector(15 downto 0) := x"0000"; -- custom user code

    -- module configuration --

    MULDIV_USE   : boolean := true; -- implement multiplier/divider unit? (default=true)

    WB32_USE     : boolean := true; -- implement WB32 unit? (default=true)

    WDT_USE      : boolean := true; -- implement WDT? (default=true)

    GPIO_USE     : boolean := true; -- implement GPIO unit? (default=true)

    TIMER_USE    : boolean := true; -- implement timer? (default=true)

    UART_USE     : boolean := true; -- implement UART? (default=true)

    CRC_USE      : boolean := true; -- implement CRC unit? (default=true)

    CFU_USE      : boolean := false; -- implement custom functions unit? (default=false)

    PWM_USE      : boolean := true; -- implement PWM controller?

    TWI_USE      : boolean := true; -- implement two wire serial interface? (default=true)

    SPI_USE      : boolean := true; -- implement SPI? (default=true)

    TRNG_USE     : boolean := false; -- implement TRNG? (default=false)

    EXIRQ_USE    : boolean := true; -- implement EXIRQ? (default=true)

    FREQ_GEN_USE : boolean := true; -- implement FREQ_GEN? (default=true)

    -- boot configuration --

    BOOTLD_USE   : boolean := true; -- implement and use bootloader? (default=true)

    IMEM_AS_ROM  : boolean := false -- implement IMEM as read-only memory? (default=false)

  );

  port (

    -- global control --

    clk_i       : in  std_logic; -- global clock, rising edge

    rst_i       : in  std_logic; -- global reset, async, low-active

    -- gpio --

    gpio_o      : out std_logic_vector(15 downto 0); -- parallel output

    gpio_i      : in  std_logic_vector(15 downto 0); -- parallel input

    -- pwm channels --

    pwm_o       : out std_logic_vector(03 downto 0); -- pwm channels

    -- arbitrary frequency generator --

    freq_gen_o  : out std_logic_vector(02 downto 0); -- programmable frequency output

    -- serial com --

    uart_txd_o  : out std_logic; -- UART send data

    uart_rxd_i  : in  std_logic; -- UART receive data

    spi_sclk_o  : out std_logic; -- serial clock line

    spi_mosi_o  : out std_logic; -- serial data line out

    spi_miso_i  : in  std_logic; -- serial data line in

    spi_cs_o    : out std_logic_vector(05 downto 0); -- SPI CS

    twi_sda_io  : inout std_logic; -- twi serial data line

    twi_scl_io  : inout std_logic; -- twi serial clock line

    -- 32-bit wishbone interface --

    wb_adr_o    : out std_logic_vector(31 downto 0); -- address

    wb_dat_i    : in  std_logic_vector(31 downto 0); -- read data

    wb_dat_o    : out std_logic_vector(31 downto 0); -- write data

    wb_we_o     : out std_logic; -- read/write

    wb_sel_o    : out std_logic_vector(03 downto 0); -- byte enable

    wb_stb_o    : out std_logic; -- strobe

    wb_cyc_o    : out std_logic; -- valid cycle

    wb_ack_i    : in  std_logic; -- transfer acknowledge

    -- external interrupts --

    ext_irq_i   : in  std_logic_vector(07 downto 0); -- external interrupt request lines

    ext_ack_o   : out std_logic_vector(07 downto 0)  -- external interrupt request acknowledges

  );

end neo430_top_std_logic;

architecture neo430_top_std_logic_rtl of neo430_top_std_logic is

  -- other signals for conversion --

  constant usrcode_c    : std_ulogic_vector(15 downto 0) := std_ulogic_vector(USER_CODE);

  signal clk_i_int      : std_ulogic;

  signal rst_i_int      : std_ulogic;

  signal gpio_o_int     : std_ulogic_vector(15 downto 0);

  signal gpio_i_int     : std_ulogic_vector(15 downto 0);

  signal pwm_o_int      : std_ulogic_vector(03 downto 0);

  signal uart_txd_o_int : std_ulogic;

  signal uart_rxd_i_int : std_ulogic;

  signal spi_sclk_o_int : std_ulogic;

  signal spi_mosi_o_int : std_ulogic;

  signal spi_miso_i_int : std_ulogic;

  signal spi_cs_o_int   : std_ulogic_vector(05 downto 0);

  signal irq_i_int      : std_ulogic_vector(07 downto 0);

  signal irq_ack_o_int  : std_ulogic_vector(07 downto 0);

  signal wb_adr_o_int   : std_ulogic_vector(31 downto 0);

  signal wb_dat_i_int   : std_ulogic_vector(31 downto 0);

  signal wb_dat_o_int   : std_ulogic_vector(31 downto 0);

  signal wb_we_o_int    : std_ulogic;

  signal wb_sel_o_int   : std_ulogic_vector(03 downto 0);

  signal wb_stb_o_int   : std_ulogic;

  signal wb_cyc_o_int   : std_ulogic;

  signal wb_ack_i_int   : std_ulogic;

  signal freq_gen_o_int : std_ulogic_vector(02 downto 0);

begin

  -- CPU ----------------------------------------------------------------------

  -- -----------------------------------------------------------------------------

  neo430_top_inst: neo430_top

  generic map (

    -- general configuration --

    CLOCK_SPEED  => CLOCK_SPEED,      -- main clock in Hz

    IMEM_SIZE    => IMEM_SIZE,        -- internal IMEM size in bytes, max 48kB (default=4kB)

    DMEM_SIZE    => DMEM_SIZE,        -- internal DMEM size in bytes, max 12kB (default=2kB)

    -- additional configuration --

    USER_CODE    => usrcode_c,        -- custom user code

    -- module configuration --

    MULDIV_USE   => MULDIV_USE,       -- implement multiplier/divider unit? (default=true)

    WB32_USE     => WB32_USE,         -- implement WB32 unit? (default=true)

    WDT_USE      => WDT_USE,          -- implement WDT? (default=true)

    GPIO_USE     => GPIO_USE,         -- implement GPIO unit? (default=true)

    TIMER_USE    => TIMER_USE,        -- implement timer? (default=true)

    UART_USE     => UART_USE,         -- implement UART? (default=true)

    CRC_USE      => CRC_USE,          -- implement CRC unit? (default=true)

    CFU_USE      => CFU_USE,          -- implement CF unit? (default=false)

    PWM_USE      => PWM_USE,          -- implement PWM controller? (default=true)

    TWI_USE      => TWI_USE,          -- implement two wire serial interface? (default=true)

    SPI_USE      => SPI_USE,          -- implement SPI? (default=true)

    TRNG_USE     => TRNG_USE,         -- implement TRNG? (default=false)

    EXIRQ_USE    => EXIRQ_USE,        -- implement EXIRQ? (default=true)

    FREQ_GEN_USE => FREQ_GEN_USE,     -- implement FREQ_GEN? (default=true)

    -- boot configuration --

    BOOTLD_USE   => BOOTLD_USE,       -- implement and use bootloader? (default=true)

    IMEM_AS_ROM  => IMEM_AS_ROM       -- implement IMEM as read-only memory? (default=false)

  )

  port map (

    -- global control --

    clk_i      => clk_i_int,          -- global clock, rising edge

    rst_i      => rst_i_int,          -- global reset, async, low-active

    -- parallel io --

    gpio_o     => gpio_o_int,         -- parallel output

    gpio_i     => gpio_i_int,         -- parallel input

    -- pwm channels --

    pwm_o      => pwm_o_int,          -- pwm channels

    -- arbitrary frequency generator --

    freq_gen_o => freq_gen_o_int,     -- programmable frequency output

    -- serial com --

    uart_txd_o => uart_txd_o_int,     -- UART send data

    uart_rxd_i => uart_rxd_i_int,     -- UART receive data

    spi_sclk_o => spi_sclk_o_int,     -- serial clock line

    spi_mosi_o => spi_mosi_o_int,     -- serial data line out

    spi_miso_i => spi_miso_i_int,     -- serial data line in

    spi_cs_o   => spi_cs_o_int,       -- SPI CS 0..7

    twi_sda_io => twi_sda_io,         -- twi serial data line

    twi_scl_io => twi_scl_io,         -- twi serial clock line

    -- 32-bit wishbone interface --

    wb_adr_o   => wb_adr_o_int,       -- address

    wb_dat_i   => wb_dat_i_int,       -- read data

    wb_dat_o   => wb_dat_o_int,       -- write data

    wb_we_o    => wb_we_o_int,        -- read/write

    wb_sel_o   => wb_sel_o_int,       -- byte enable

    wb_stb_o   => wb_stb_o_int,       -- strobe

    wb_cyc_o   => wb_cyc_o_int,       -- valid cycle

    wb_ack_i   => wb_ack_i_int,       -- transfer acknowledge

    -- interrupts --

    ext_irq_i  => irq_i_int,          -- external interrupt request line

    ext_ack_o  => irq_ack_o_int       -- external interrupt request acknowledge

  );

  -- Type Conversion ----------------------------------------------------------

  -- -----------------------------------------------------------------------------

  clk_i_int      <= std_ulogic(clk_i);

  rst_i_int      <= std_ulogic(rst_i);

  gpio_i_int     <= std_ulogic_vector(gpio_i);

  uart_rxd_i_int <= std_ulogic(uart_rxd_i);

  spi_miso_i_int <= std_ulogic(spi_miso_i);

  wb_dat_i_int   <= std_ulogic_vector(wb_dat_i);

  wb_ack_i_int   <= std_ulogic(wb_ack_i);

  irq_i_int      <= std_ulogic_vector(ext_irq_i);

  gpio_o         <= std_logic_vector(gpio_o_int);

  pwm_o          <= std_logic_vector(pwm_o_int);

  uart_txd_o     <= std_logic(uart_txd_o_int);

  spi_sclk_o     <= std_logic(spi_sclk_o_int);

  spi_mosi_o     <= std_logic(spi_mosi_o_int);

  spi_cs_o       <= std_logic_vector(spi_cs_o_int);

  wb_adr_o       <= std_logic_vector(wb_adr_o_int);

  wb_dat_o       <= std_logic_vector(wb_dat_o_int);

  wb_we_o        <= std_logic(wb_we_o_int);

  wb_sel_o       <= std_logic_vector(wb_sel_o_int);

  wb_stb_o       <= std_logic(wb_stb_o_int);

  wb_cyc_o       <= std_logic(wb_cyc_o_int);

  ext_ack_o      <= std_logic_vector(irq_ack_o_int);

  freq_gen_o     <= std_logic_vector(freq_gen_o_int);

end neo430_top_std_logic_rtl;