Subversion Repositories spacewiresystemc

# (C) 2001-2017 Intel Corporation. All rights reserved.

# Your use of Intel Corporation's design tools, logic functions and other 

# software and tools, and its AMPP partner logic functions, and any output 

# files any of the foregoing (including device programming or simulation 

# files), and any associated documentation or information are expressly subject 

# to the terms and conditions of the Intel Program License Subscription 

# Agreement, Intel MegaCore Function License Agreement, or other applicable 

# license agreement, including, without limitation, that your use is for the 

# sole purpose of programming logic devices manufactured by Intel and sold by 

# Intel or its authorized distributors.  Please refer to the applicable 

# agreement for further details.

#####################################################################

#

# THIS IS AN AUTO-GENERATED FILE!

# -------------------------------

# If you modify this files, all your changes will be lost if you

# regenerate the core!

#

# FILE DESCRIPTION

# ----------------

# This file specifies the timing properties of the memory device and

# of the memory interface

package require ::quartus::ddr_timing_model

###################

#                 #

# TIMING SETTINGS #

#                 #

###################

# Interface Clock Period

set t(CK) 3.333

# Reference Clock Period

set t(refCK) 8.0

# Minimum Clock Period

set t(min_CK) 2.5

##########################

# Memory timing parameters

##########################

# A/C Setup/Hold

set t(IS) 0.35

set t(IH) 0.35

# Data Setup/Hold

set t(DS) 0.225

set t(DH) 0.225

# DQS clock edge to DQ data edge (in same group)

set t(DQSQ) [expr { 120 / 1000.0 }]

set t(QH) 0.38

set t(QH) [expr (0.5*$t(CK)-(0.5-$t(QH))*$t(min_CK))/$t(CK)]

# Convert QH into time unit so that it's consistent with DQSQ

set t(QH_time) [ expr $t(QH) * $t(CK) ]

# DQS to CK input timing

set t(DSS) 0.2

set t(DSH) 0.2

set t(DQSS) 0.25

set t(DSS) [expr $t(DSS)*$t(min_CK)/$t(CK)]

set t(DSH) [expr $t(DSH)*$t(min_CK)/$t(CK)]

set t(DQSS) [expr 0.5 - $t(DQSS)*$t(min_CK)/$t(CK)]

# DQS Width

set t(QSH) 0.38

# Write Levelling parameters

set t(WLS) [ expr 0.13 * $t(min_CK) ]

set t(WLH) [ expr 0.13 * $t(min_CK) ]

# DQS to CK timing on reads

set t(DQSCK) [expr { 400 / 1000.0 }]

# FPGA Duty Cycle Distortion

set t(DCD) 0.0

#######################

# Controller parameters

#######################

set t(RL) 7

set t(WL) 6

set t(DWIDTH_RATIO) [expr { 1 * 2 }]

set t(rd_to_wr_turnaround_oct) 2

#####################

# FPGA specifications

#####################

# Sequencer VCALIB width. Determins multicycle length

set vcalib_count_width 2

set fpga(tPLL_PSERR) 0.0

set fpga(tPLL_JITTER) 0.0

# Systematic DCD in the Write Levelling delay chains

set t(WL_DCD) [expr [get_micro_node_delay -micro WL_DCD -parameters {IO VPAD} -in_fitter]/1000.0]

# Non-systematic DC jitter in the Write Levelling delay chains

set t(WL_DCJ) [expr [get_micro_node_delay -micro WL_DC_JITTER -parameters {IO VPAD} -in_fitter]/1000.0]

# Phase shift error in the Write Levelling delay chains between DQ and DQS

set t(WL_PSE) 0.0

# Jitter in the Write Levelling delay chains

set t(WL_JITTER) [expr [get_micro_node_delay -micro WL_JITTER -parameters {IO PHY_SHORT} -in_fitter]/1000.0]

set t(WL_JITTER_DIVISION) [expr [get_micro_node_delay -micro WL_JITTER_DIVISION -parameters {IO PHY_SHORT} -in_fitter]/100.0]

###############

# SSN Info

###############

set SSN(pushout_o) [expr [get_micro_node_delay -micro SSO -parameters [list IO DQDQSABSOLUTE NONLEVELED MAX] -in_fitter]/1000.0]

set SSN(pullin_o)  [expr [get_micro_node_delay -micro SSO -parameters [list IO DQDQSABSOLUTE NONLEVELED MIN] -in_fitter]/-1000.0]

set SSN(pushout_i) [expr [get_micro_node_delay -micro SSI -parameters [list IO DQDQSABSOLUTE NONLEVELED MAX] -in_fitter]/1000.0]

set SSN(pullin_i)  [expr [get_micro_node_delay -micro SSI -parameters [list IO DQDQSABSOLUTE NONLEVELED MIN] -in_fitter]/-1000.0]

set SSN(rel_pushout_o) [expr [get_micro_node_delay -micro SSO -parameters [list IO DQDQSRELATIVE NONLEVELED MAX] -in_fitter]/1000.0]

set SSN(rel_pullin_o)  [expr [get_micro_node_delay -micro SSO -parameters [list IO DQDQSRELATIVE NONLEVELED MIN] -in_fitter]/-1000.0]

set SSN(rel_pushout_i) [expr [get_micro_node_delay -micro SSI -parameters [list IO DQDQSRELATIVE NONLEVELED MAX] -in_fitter]/1000.0]

set SSN(rel_pullin_i)  [expr [get_micro_node_delay -micro SSI -parameters [list IO DQDQSRELATIVE NONLEVELED MIN] -in_fitter]/-1000.0]

###############

# Board Effects

###############

# Intersymbol Interference

set ISI(addresscmd_setup) 0.0

set ISI(addresscmd_hold) 0.0

set ISI(DQ) 0.0

set ISI(DQS) 0.0

set ISI(READ_DQ) 0.0

set ISI(READ_DQS) 0.0

# Board skews

set board(abs_max_CK_delay) 0.6

set board(abs_max_DQS_delay) 0.6

set board(minCK_DQS_skew) -0.01

set board(maxCK_DQS_skew) 0.01

set board(tpd_inter_DIMM) 0.0

set board(intra_DQS_group_skew) 0.02

set board(inter_DQS_group_skew) 0.02

set board(DQ_DQS_skew) 0.0

set board(intra_addr_ctrl_skew) 0.02

set board(addresscmd_CK_skew) 0.0