OpenCores
URL https://opencores.org/ocsvn/ps2/ps2/trunk

Subversion Repositories ps2

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /
    from Rev 43 to Rev 42
    Reverse comparison

Rev 43 → Rev 42

/trunk/sim/rtl_sim/log/ncelab.log
1,4 → 1,4
TOOL: ncelab 04.10-b001: Started on Dec 01, 2003 at 15:50:29
TOOL: ncelab 04.10-b001: Started on Nov 30, 2003 at 12:53:31
ncelab
-f ncelab.args
-MESSAGES
53,4 → 53,4
Pseudo assignments: 5 59
Simulation timescale: 1ps
Writing initial simulation snapshot: worklib.ps2_test_bench:rtl
TOOL: ncelab 04.10-b001: Exiting on Dec 01, 2003 at 15:50:32 (total: 00:00:03)
TOOL: ncelab 04.10-b001: Exiting on Nov 30, 2003 at 12:53:33 (total: 00:00:02)
/trunk/sim/rtl_sim/log/ncvlog.log
1,4 → 1,4
TOOL: ncvlog 04.10-b001: Started on Dec 01, 2003 at 15:50:28
TOOL: ncvlog 04.10-b001: Started on Nov 30, 2003 at 12:53:30
ncvlog
-f ncvlog.args
-CDSLIB ../bin/cds.lib
56,4 → 56,4
file: ../../../bench/verilog/ps2_sim_top.v
module worklib.ps2_sim_top:v
errors: 0, warnings: 0
TOOL: ncvlog 04.10-b001: Exiting on Dec 01, 2003 at 15:50:29 (total: 00:00:01)
TOOL: ncvlog 04.10-b001: Exiting on Nov 30, 2003 at 12:53:30 (total: 00:00:00)
/trunk/sim/rtl_sim/log/ncsim.log
1,4 → 1,4
TOOL: ncsim 04.10-b001: Started on Dec 01, 2003 at 15:50:33
TOOL: ncsim 04.10-b001: Started on Nov 30, 2003 at 12:53:34
ncsim
-LICQUEUE
-f ./ncsim.args
24,4 → 24,4
exit (00000000)
/projects/highland/gorand/tmp/ps2/bench/verilog/ps2_test_bench.v:289 $finish(0);
ncsim> quit
TOOL: ncsim 04.10-b001: Exiting on Dec 01, 2003 at 15:58:05 (total: 00:07:32)
TOOL: ncsim 04.10-b001: Exiting on Nov 30, 2003 at 13:02:41 (total: 00:09:07)
trunk/sim/rtl_sim/run/run_sim_ps2 Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: trunk/sim/rtl_sim/run/run_sim =================================================================== --- trunk/sim/rtl_sim/run/run_sim (revision 43) +++ trunk/sim/rtl_sim/run/run_sim (revision 42) @@ -1,2 +1,99 @@ -#!/bin/sh -./run_sim_ps2 ps2_test_bench +#!/bin/csh -f + +set current_par = 0 +set output_waveform = 0 +while ( $current_par < $# ) + @ current_par = $current_par + 1 + case wave: + @ output_waveform = 1 + breaksw + default: + echo 'Unknown option "'$argv[$current_par]'"!' + exit + breaksw + endsw +end + +echo "-CDSLIB ../bin/cds.lib" > ncvlog.args +echo "-HDLVAR ../bin/hdl.var" >> ncvlog.args +echo "-MESSAGES" >> ncvlog.args +echo "-INCDIR ../../../bench/verilog" >> ncvlog.args +echo "-INCDIR ../../../rtl/verilog" >> ncvlog.args +echo "-NOCOPYRIGHT" >> ncvlog.args +echo "-LOGFILE ../log/ncvlog.log" >> ncvlog.args +echo '-DEFINE "PS2_NUM_OF_NORMAL_SCANCODES 85"' >> ./ncvlog.args +echo '-DEFINE "PS2_NUM_OF_EXTENDED_SCANCODES 38"' >> ./ncvlog.args +echo '-DEFINE "SIM"' >> ./ncvlog.args + + +foreach filename ( `cat ../bin/rtl_file_list` ) + echo "../../../rtl/verilog/"$filename >> ncvlog.args +end + +foreach filename ( `cat ../bin/sim_file_list` ) + echo "../../../bench/verilog/"$filename >> ncvlog.args +end + +ncvlog -f ncvlog.args + +echo "-MESSAGES" > ncelab.args +echo "-NOCOPYRIGHT" >> ncelab.args +echo "-CDSLIB ../bin/cds.lib" >> ncelab.args +echo "-HDLVAR ../bin/hdl.var" >> ncelab.args +echo "-LOGFILE ../log/ncelab.log" >> ncelab.args +echo "-TIMESCALE 1ns/100ps" >> ncelab.args +echo "-SNAPSHOT worklib.ps2_test_bench:rtl" >> ncelab.args +echo "-NO_TCHK_MSG" >> ncelab.args +echo "-ACCESS +RWC" >> ncelab.args +echo "worklib.ps2_test_bench" >> ncelab.args + +ncelab -f ncelab.args + +echo "-MESSAGES" > ncsim.args +echo "-NOCOPYRIGHT" >> ncsim.args +echo "-CDSLIB ../bin/cds.lib" >> ncsim.args +echo "-HDLVAR ../bin/hdl.var" >> ncsim.args +echo "-INPUT ncsim.tcl" >> ncsim.args +echo "-LOGFILE ../log/ncsim.log" >> ncsim.args +echo "worklib.ps2_test_bench:rtl" >> ncsim.args + +if ( $output_waveform ) then + echo "database -open waves -shm -into ../out/waves.shm" > ./ncsim.tcl + echo "probe -create -database waves ps2_test_bench -shm -all -depth all" >> ./ncsim.tcl + echo "run" >> ./ncsim.tcl +else + echo "run" > ./ncsim.tcl +endif + +echo "quit" >> ncsim.tcl + +ncsim -LICQUEUE -f ./ncsim.args + +set exit_line_nb = `sed -n '/exit/=' < ../log/ncsim.log` + +#echo "$exit_line_nb" + +set dead_line_nb = 0 + +if ( $exit_line_nb ) then + + @ dead_line_nb = $exit_line_nb - 1 + set exit_line=`sed -n $exit_line_nb's/exit/&/gp' < ../log/ncsim.log` + set dead_line=`sed -n $dead_line_nb's/report/&/gp' < ../log/ncsim.log` + + echo "$dead_line" + echo "$exit_line" + + echo "TEST: ps2" + if ( "$dead_line" == "report (deaddead)" ) then + if ( "$exit_line" == "exit (00000000)" ) then + echo "STATUS: passed" #|tee -a ../log/run_sim.log 2>&1 + else + echo "STATUS: failed" #|tee -a ../log/run_sim.log 2>&1 + endif + else + echo "STATUS: failed" + endif + +endif +

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.