OpenCores
URL https://opencores.org/ocsvn/uart16750/uart16750/trunk

Subversion Repositories uart16750

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /
    from Rev 12 to Rev 13
    ↔ Reverse comparison
  •

Rev 12 → Rev 13

/trunk/rtl/vhdl/uart_interrupt.vhd
3,8 → 3,12
--
-- Author: Sebastian Witt
-- Date: 27.01.2008
-- Version: 1.0
-- Version: 1.1
--
-- History: 1.0 - Initial version
-- 1.1 - Automatic flow control
--
--
-- This code is free software; you can redistribute it and/or
-- modify it under the terms of the GNU Lesser General Public
-- License as published by the Free Software Foundation; either
23,7 → 27,6
 
LIBRARY IEEE;
USE IEEE.std_logic_1164.all;
USE IEEE.std_logic_unsigned.all;
USE IEEE.numeric_std.all;
 
-- Serial UART interrupt control
36,6 → 39,7
THI : in std_logic; -- Transmitter holding register empty interrupt
RDA : in std_logic; -- Receiver data available
CTI : in std_logic; -- Character timeout indication
AFE : in std_logic; -- Automatic flow control enable
MSR : in std_logic_vector(3 downto 0); -- MSR 3:0
IIR : out std_logic_vector(3 downto 0); -- IIR 3:0
INT : out std_logic -- Interrupt
64,8 → 68,8
-- Priority 3: Transmitter holding register empty
iTHRInterrupt <= IER(1) and THI;
 
-- Priority 4: Modem status interrupt: dCTS, dDSR, TERI, dDCD
iMSRInterrupt <= IER(3) and (MSR(0) or MSR(1) or MSR(2) or MSR(3));
-- Priority 4: Modem status interrupt: dCTS (when AFC is disabled), dDSR, TERI, dDCD
iMSRInterrupt <= IER(3) and ((MSR(0) and not AFE) or MSR(1) or MSR(2) or MSR(3));
 
-- IIR
IC_IIR: process (CLK, RST)
/trunk/rtl/vhdl/uart_16750.vhd
3,11 → 3,12
--
-- Author: Sebastian Witt
-- Date: 29.01.2008
-- Version: 1.2
-- Version: 1.3
--
-- History: 1.0 - Initial version
-- 1.1 - THR empty interrupt register connected to RST
-- 1.2 - Registered outputs
-- 1.3 - Automatic flow control
--
--
-- This code is free software; you can redistribute it and/or
28,7 → 29,6
 
LIBRARY IEEE;
USE IEEE.std_logic_1164.all;
USE IEEE.std_logic_unsigned.all;
USE IEEE.numeric_std.all;
 
-- Serial UART
110,6 → 110,7
THI : in std_logic; -- Transmitter holding register empty interrupt
RDA : in std_logic; -- Receiver data available
CTI : in std_logic; -- Character timeout indication
AFE : in std_logic; -- Automatic flow control enable
MSR : in std_logic_vector(3 downto 0); -- MSR 3:0
IIR : out std_logic_vector(3 downto 0); -- IIR 3:0
INT : out std_logic -- Interrupt
362,10 → 363,12
signal iFEIncrement : std_logic; -- FIFO error counter increment
signal iFEDecrement : std_logic; -- FIFO error counter decrement
signal iRDAInterrupt : std_logic; -- Receiver data available interrupt (DA or FIFO trigger level)
signal iTimeoutCount : std_logic_vector(5 downto 0); -- Character timeout counter (FIFO mode)
signal iTimeoutCount : unsigned(5 downto 0); -- Character timeout counter (FIFO mode)
signal iCharTimeout : std_logic; -- Character timeout indication (FIFO mode)
signal iLSR_THRERE : std_logic; -- LSR THRE rising edge for interrupt generation
signal iTHRInterrupt : std_logic; -- Transmitter holding register empty interrupt
signal iTXEnable : std_logic; -- Transmitter enable signal
signal iRTS : std_logic; -- Internal RTS signal with/without automatic flow control
 
 
begin
460,6 → 463,7
THI => iTHRInterrupt,
RDA => iRDAInterrupt,
CTI => iCharTimeout,
AFE => iMCR_AFE,
MSR => iMSR(3 downto 0),
IIR => iIIR(3 downto 0),
INT => INT
501,7 → 505,7
if (iRXFIFOEmpty = '1' or iRBRRead = '1' or iRXFIFOWrite = '1') then
iTimeoutCount <= (others => '0');
elsif (iRXFIFOEmpty = '0' and iBaudtick2x = '1' and iTimeoutCount(5) = '0') then
iTimeoutCount <= iTimeoutCount + '1';
iTimeoutCount <= iTimeoutCount + 1;
end if;
 
-- Timeout indication
683,7 → 687,7
iLSR_TEMT <= '1' when iTXRunning = '0' and iLSR_THRE = '1' else '0';
 
-- Modem status register
iMSR_CTS <= '1' when (iMCR_LOOP = '1' and iMCR_RTS = '1') or (iMCR_LOOP = '0' and iCTSn = '0') else '0';
iMSR_CTS <= '1' when (iMCR_LOOP = '1' and iRTS = '1') or (iMCR_LOOP = '0' and iCTSn = '0') else '0';
iMSR_DSR <= '1' when (iMCR_LOOP = '1' and iMCR_DTR = '1') or (iMCR_LOOP = '0' and iDSRn = '0') else '0';
iMSR_RI <= '1' when (iMCR_LOOP = '1' and iMCR_OUT1 = '1') or (iMCR_LOOP = '0' and iRIn = '0') else '0';
iMSR_DCD <= '1' when (iMCR_LOOP = '1' and iMCR_OUT2 = '1') or (iMCR_LOOP = '0' and iDCDn = '0') else '0';
865,6 → 869,9
iRXClear <= '0';
iSIN <= iSINr when iMCR_LOOP = '0' else iSOUT;
 
-- Transmitter enable signal
-- TODO: Use iCTSNs instead of iMSR_CTS? Input filter increases delay for Auto-CTS recognition.
iTXEnable <= '1' when iTXFIFOEmpty = '0' and (iMCR_AFE = '0' or (iMCR_AFE = '1' and iMSR_CTS = '1')) else '0';
 
-- Transmitter process
UART_TXPROC: process (CLK, RST)
884,7 → 891,7
iTXRunning <= '0';
 
case State is
when IDLE => if (iTXFIFOEmpty = '0') then
when IDLE => if (iTXEnable = '1') then
iTXStart <= '1'; -- Start transmitter
State := TXSTART;
else
943,6 → 950,21
end if;
end process;
 
-- Automatic flow control
UART_AFC: process (CLK, RST)
begin
if (RST = '1') then
iRTS <= '0';
elsif (CLK'event and CLK = '1') then
if (iMCR_RTS = '0' or (iMCR_AFE = '1' and iRXFIFOTrigger = '1')) then
-- Deassert when MCR_RTS is not set or AFC is enabled and the RX FIFO trigger level is reached
iRTS <= '0';
elsif (iMCR_RTS = '1' and (iMCR_AFE = '0' or (iMCR_AFE = '1' and iRXFIFOEmpty = '1'))) then
-- Assert when MCR_RTS is set and AFC is disabled or when AFC is enabled and the RX FIFO is empty
iRTS <= '1';
end if;
end if;
end process;
 
-- Output registers
UART_OUTREGS: process (CLK, RST)
982,7 → 1004,7
OUT2N <= '1';
end if;
-- RTS
if (iMCR_LOOP = '1' or iMCR_RTS = '0') then
if (iMCR_LOOP = '1' or iRTS = '0') then
RTSN <= '1';
end if;
-- DTR

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.