Line 1... |
Line 1... |
|
|
|
//// ////
|
|
//// Author: Eyal Hochberg ////
|
|
//// eyal@provartec.com ////
|
|
//// ////
|
|
//// Downloaded from: http://www.opencores.org ////
|
|
/////////////////////////////////////////////////////////////////////
|
|
//// ////
|
|
//// Copyright (C) 2010 Provartec LTD ////
|
|
//// www.provartec.com ////
|
|
//// info@provartec.com ////
|
|
//// ////
|
|
//// This source file may be used and distributed without ////
|
|
//// restriction provided that this copyright statement is not ////
|
|
//// removed from the file and that any derivative work contains ////
|
|
//// the original copyright notice and the associated disclaimer.////
|
|
//// ////
|
|
//// This source file is free software; you can redistribute it ////
|
|
//// and/or modify it under the terms of the GNU Lesser General ////
|
|
//// Public License as published by the Free Software Foundation.////
|
|
//// ////
|
|
//// This source is distributed in the hope that it will be ////
|
|
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
|
|
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
|
|
//// PURPOSE. See the GNU Lesser General Public License for more////
|
|
//// details. http://www.gnu.org/licenses/lgpl.html ////
|
|
//// ////
|
|
//////////////////////////////////////////////////////////////////##>
|
|
|
|
SWAP.USER PREFIX DMA ## Prefix for all modules and file names
|
SWAP REGNAME DMA
|
|
|
|
ADD_REG(CONFIG0, 0, TYPE_RW, "DMA command reg 0")
|
ADD_REG(CONFIG0, 0, TYPE_RW, "DMA command reg 0")
|
ADD_REG(CONFIG1, 4, TYPE_RW, "DMA command reg 1")
|
ADD_REG(CONFIG1, 4, TYPE_RW, "DMA command reg 1")
|
ADD_REG(CONFIG2, 8, TYPE_RW, "DMA command reg 2")
|
ADD_REG(CONFIG2, 8, TYPE_RW, "DMA command reg 2")
|
ADD_REG(CONFIG3, C, TYPE_RW, "DMA command reg 3")
|
ADD_REG(CONFIG3, C, TYPE_RW, "DMA command reg 3")
|
ADD_REG(START, 20, TYPE_WO, "Channel start")
|
ADD_REG(START, 20, TYPE_WO, "Channel start")
|
ADD_REG(STATUS, 30, TYPE_RO, "Channel status")
|
ADD_REG(STATUS, 30, TYPE_RO, "Channel status")
|
|
|
ADD_FIELD(0, rd_start_addr, 32, 0, 0, TYPE_RW, "Read start address")
|
|
ADD_FIELD(1, wr_start_addr, 32, 0, 0, TYPE_RW, "Write start address")
|
ADD_FIELD(CONFIG0, rd_start_addr, 32, 0, 0, TYPE_RW, "Read start address")
|
ADD_FIELD(2, buffer_size, 32, 0, 0, TYPE_RW, "Buffer size")
|
ADD_FIELD(CONFIG1, wr_start_addr, 32, 0, 0, TYPE_RW, "Write start address")
|
ADD_FIELD(3, set_int, 1, 0, 0, TYPE_RW, "Set interrupt on completion")
|
ADD_FIELD(CONFIG2, buffer_size, 32, 0, 0, TYPE_RW, "Buffer size")
|
ADD_FIELD(3, cmd_last, 1, 1, 1, TYPE_RW, "Last command in list")
|
ADD_FIELD(CONFIG3, set_int, 1, 0, 0, TYPE_RW, "Set interrupt on completion")
|
ADD_FIELD(3, next_addr, 28, 3, 0, TYPE_RW, "Next command address")
|
ADD_FIELD(CONFIG3, cmd_last, 1, 1, 1, TYPE_RW, "Last command in list")
|
ADD_FIELD(4, ch_start , 1, 0, 0, TYPE_WO, "Channel start")
|
ADD_FIELD(CONFIG3, next_addr, 28, 4, 0, TYPE_RW, "Next command address")
|
ADD_FIELD(5, buffer_count, 16, 0, 0, TYPE_RO, "Buffer counter")
|
ADD_FIELD(START, ch_start , 1, 0, 0, TYPE_WO, "Channel start")
|
ADD_FIELD(5, int_count, 16, 16, 0, TYPE_RO, "Interrupt counter")
|
ADD_FIELD(STATUS, buffer_count, 16, 0, 0, TYPE_RO, "Buffer counter")
|
|
ADD_FIELD(STATUS, int_count, 16, 16, 0, TYPE_RO, "Interrupt counter")
|
|
|