URL
https://opencores.org/ocsvn/a-z80/a-z80/trunk
Subversion Repositories a-z80
[/] [a-z80/] [trunk/] [host/] [zxspectrum_de1/] [ula/] [ram8.v] - Rev 13
Go to most recent revision | Compare with Previous | Blame | View Log
// megafunction wizard: %RAM: 1-PORT% // GENERATION: STANDARD // VERSION: WM1.0 // MODULE: altsyncram // ============================================================ // File Name: ram8.v // Megafunction Name(s): // altsyncram // // Simulation Library Files(s): // altera_mf // ============================================================ // ************************************************************ // THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! // // 13.0.1 Build 232 06/12/2013 SP 1 SJ Web Edition // ************************************************************ //Copyright (C) 1991-2013 Altera Corporation //Your use of Altera Corporation's design tools, logic functions //and other software and tools, and its AMPP partner logic //functions, and any output files from any of the foregoing //(including device programming or simulation files), and any //associated documentation or information are expressly subject //to the terms and conditions of the Altera Program License //Subscription Agreement, Altera MegaCore Function License //Agreement, or other applicable license agreement, including, //without limitation, that your use is for the sole purpose of //programming logic devices manufactured by Altera and sold by //Altera or its authorized distributors. Please refer to the //applicable agreement for further details. // synopsys translate_off `timescale 1 ps / 1 ps // synopsys translate_on module ram8 ( address, clock, data, wren, q); input [12:0] address; input clock; input [7:0] data; input wren; output [7:0] q; `ifndef ALTERA_RESERVED_QIS // synopsys translate_off `endif tri1 clock; `ifndef ALTERA_RESERVED_QIS // synopsys translate_on `endif wire [7:0] sub_wire0; wire [7:0] q = sub_wire0[7:0]; altsyncram altsyncram_component ( .address_a (address), .clock0 (clock), .data_a (data), .wren_a (wren), .q_a (sub_wire0), .aclr0 (1'b0), .aclr1 (1'b0), .address_b (1'b1), .addressstall_a (1'b0), .addressstall_b (1'b0), .byteena_a (1'b1), .byteena_b (1'b1), .clock1 (1'b1), .clocken0 (1'b1), .clocken1 (1'b1), .clocken2 (1'b1), .clocken3 (1'b1), .data_b (1'b1), .eccstatus (), .q_b (), .rden_a (1'b1), .rden_b (1'b1), .wren_b (1'b0)); defparam altsyncram_component.clock_enable_input_a = "BYPASS", altsyncram_component.clock_enable_output_a = "BYPASS", `ifdef NO_PLI altsyncram_component.init_file = "test_scr.rif" `else altsyncram_component.init_file = "test_scr.hex" `endif , altsyncram_component.intended_device_family = "Cyclone II", altsyncram_component.lpm_hint = "ENABLE_RUNTIME_MOD=NO", altsyncram_component.lpm_type = "altsyncram", altsyncram_component.numwords_a = 8192, altsyncram_component.operation_mode = "SINGLE_PORT", altsyncram_component.outdata_aclr_a = "NONE", altsyncram_component.outdata_reg_a = "UNREGISTERED", altsyncram_component.power_up_uninitialized = "FALSE", altsyncram_component.widthad_a = 13, altsyncram_component.width_a = 8, altsyncram_component.width_byteena_a = 1; endmodule // ============================================================ // CNX file retrieval info // ============================================================ // Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0" // Retrieval info: PRIVATE: AclrAddr NUMERIC "0" // Retrieval info: PRIVATE: AclrByte NUMERIC "0" // Retrieval info: PRIVATE: AclrData NUMERIC "0" // Retrieval info: PRIVATE: AclrOutput NUMERIC "0" // Retrieval info: PRIVATE: BYTE_ENABLE NUMERIC "0" // Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8" // Retrieval info: PRIVATE: BlankMemory NUMERIC "0" // Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "0" // Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0" // Retrieval info: PRIVATE: Clken NUMERIC "0" // Retrieval info: PRIVATE: DataBusSeparated NUMERIC "1" // Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0" // Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_A" // Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0" // Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone II" // Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0" // Retrieval info: PRIVATE: JTAG_ID STRING "NONE" // Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0" // Retrieval info: PRIVATE: MIFfilename STRING "test_scr.hex" // Retrieval info: PRIVATE: NUMWORDS_A NUMERIC "8192" // Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0" // Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_A NUMERIC "3" // Retrieval info: PRIVATE: RegAddr NUMERIC "1" // Retrieval info: PRIVATE: RegData NUMERIC "1" // Retrieval info: PRIVATE: RegOutput NUMERIC "0" // Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0" // Retrieval info: PRIVATE: SingleClock NUMERIC "1" // Retrieval info: PRIVATE: UseDQRAM NUMERIC "1" // Retrieval info: PRIVATE: WRCONTROL_ACLR_A NUMERIC "0" // Retrieval info: PRIVATE: WidthAddr NUMERIC "13" // Retrieval info: PRIVATE: WidthData NUMERIC "8" // Retrieval info: PRIVATE: rden NUMERIC "0" // Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all // Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "BYPASS" // Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_A STRING "BYPASS" // Retrieval info: CONSTANT: INIT_FILE STRING "test_scr.hex" // Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone II" // Retrieval info: CONSTANT: LPM_HINT STRING "ENABLE_RUNTIME_MOD=NO" // Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram" // Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "8192" // Retrieval info: CONSTANT: OPERATION_MODE STRING "SINGLE_PORT" // Retrieval info: CONSTANT: OUTDATA_ACLR_A STRING "NONE" // Retrieval info: CONSTANT: OUTDATA_REG_A STRING "UNREGISTERED" // Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE" // Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "13" // Retrieval info: CONSTANT: WIDTH_A NUMERIC "8" // Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1" // Retrieval info: USED_PORT: address 0 0 13 0 INPUT NODEFVAL "address[12..0]" // Retrieval info: USED_PORT: clock 0 0 0 0 INPUT VCC "clock" // Retrieval info: USED_PORT: data 0 0 8 0 INPUT NODEFVAL "data[7..0]" // Retrieval info: USED_PORT: q 0 0 8 0 OUTPUT NODEFVAL "q[7..0]" // Retrieval info: USED_PORT: wren 0 0 0 0 INPUT NODEFVAL "wren" // Retrieval info: CONNECT: @address_a 0 0 13 0 address 0 0 13 0 // Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0 // Retrieval info: CONNECT: @data_a 0 0 8 0 data 0 0 8 0 // Retrieval info: CONNECT: @wren_a 0 0 0 0 wren 0 0 0 0 // Retrieval info: CONNECT: q 0 0 8 0 @q_a 0 0 8 0 // Retrieval info: GEN_FILE: TYPE_NORMAL ram8.v TRUE // Retrieval info: GEN_FILE: TYPE_NORMAL ram8.inc FALSE // Retrieval info: GEN_FILE: TYPE_NORMAL ram8.cmp FALSE // Retrieval info: GEN_FILE: TYPE_NORMAL ram8.bsf FALSE // Retrieval info: GEN_FILE: TYPE_NORMAL ram8_inst.v FALSE // Retrieval info: GEN_FILE: TYPE_NORMAL ram8_bb.v FALSE // Retrieval info: LIB_FILE: altera_mf
Go to most recent revision | Compare with Previous | Blame | View Log