URL
https://opencores.org/ocsvn/amber/amber/trunk
Subversion Repositories amber
[/] [amber/] [trunk/] [hw/] [tests/] [flow3.S] - Rev 66
Go to most recent revision | Compare with Previous | Blame | View Log
/*****************************************************************
// //
// Amber 2 Core Instruction Test //
// //
// This file is part of the Amber project //
// http://www.opencores.org/project,amber //
// //
// Description //
// Tests ldm where the pc is loaded which causes a jump. //
// At the same time the mode is changed, This is repeated //
// with the cache enabled. //
// //
// Author(s): //
// - Conor Santifort, csantifort.amber@gmail.com //
// //
//////////////////////////////////////////////////////////////////
// //
// Copyright (C) 2010 Authors and OPENCORES.ORG //
// //
// This source file may be used and distributed without //
// restriction provided that this copyright statement is not //
// removed from the file and that any derivative work contains //
// the original copyright notice and the associated disclaimer. //
// //
// This source file is free software; you can redistribute it //
// and/or modify it under the terms of the GNU Lesser General //
// Public License as published by the Free Software Foundation; //
// either version 2.1 of the License, or (at your option) any //
// later version. //
// //
// This source is distributed in the hope that it will be //
// useful, but WITHOUT ANY WARRANTY; without even the implied //
// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //
// PURPOSE. See the GNU Lesser General Public License for more //
// details. //
// //
// You should have received a copy of the GNU Lesser General //
// Public License along with this source; if not, download it //
// from http://www.opencores.org/lgpl.shtml //
// //
*****************************************************************/
#include "amber_registers.h"
.section .text
.globl main
main:
@ Run through the test 4 times
@ 1 - cache off
@ 2 - cache on but empty
@ 3 - cache on and loaded
@ 4 - same as 3
mov r7, #40
1: mov r0, #0x1000
ldr r6, =JumpHere
bic r6, r6, #0x3
orr r6, r6, #0x1 @ set the mode to jump to
mov r2, #17
mov r3, #46
mov r4, #99
mov r5, #123
stm r0, {r2-r6}
ldm r0, {r11-pc}^
b testfail
b testfail
b testfail
b testfail
b testfail
b testfail
b testfail
b testfail
b testfail
b testfail
JumpHere:
b 2f
b testfail
b testfail
b testfail
2:
@ Check the mode is 0x1
mov r0, pc
and r0, r0, #0x3
cmp r0, #0x1
movne r10, #10
bne testfail
@ Switch back to supervisor mode
teqp pc, #0x3
@ Test that the instructions immediately
@ following a non-executed ldr pc are executed
mov r10, #20
mov r0, #5
cmp r0, #6
ldreq pc, =testfail @ not executed
teq r0, #5
bne testfail
b 3f
b testfail
b testfail
b testfail
3:
@ Test that the instruction after two ldrs, where the second ldr depends on the first,
@ is executed.
mov r0, #5
cmp r0, #6
ldmeqia sp!, {r4,pc}
ldr r2, Data1
ldr r2, [r2]
mov r0, #7
cmp r0, #7
movne r10, #30
bne testfail
cmp r2, #0xff
movne r10, #40
bne testfail
@ ---------------------
@ Enable the cache
@ ---------------------
mvn r0, #0
mcr 15, 0, r0, cr3, cr0, 0 @ cacheable area
mov r0, #1
mcr 15, 0, r0, cr2, cr0, 0 @ cache enable
subs r7, r7, #10
bne 1b
b testpass
b testfail
b testfail
testfail:
ldr r11, AdrTestStatus
str r10, [r11]
b testfail
testpass:
ldr r11, AdrTestStatus
mov r10, #17
str r10, [r11]
b testpass
/* Write 17 to this address to generate a Test Passed message */
AdrTestStatus: .word ADR_AMBER_TEST_STATUS
Data1: .word Data2
Data2: .word 0xff
/* ========================================================================= */
/* ========================================================================= */
Go to most recent revision | Compare with Previous | Blame | View Log