Subversion Repositories dma_ahb

/////////////////////////////////////////////////////////////////////
////                                                             ////
////  Author: Eyal Hochberg                                      ////
////          eyal@provartec.com                                 ////
////                                                             ////
////  Downloaded from: http://www.opencores.org                  ////
/////////////////////////////////////////////////////////////////////
////                                                             ////
//// Copyright (C) 2010 Provartec LTD                            ////
//// www.provartec.com                                           ////
//// info@provartec.com                                          ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
//// This source file is free software; you can redistribute it  ////
//// and/or modify it under the terms of the GNU Lesser General  ////
//// Public License as published by the Free Software Foundation.////
////                                                             ////
//// This source is distributed in the hope that it will be      ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied  ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR     ////
//// PURPOSE.  See the GNU Lesser General Public License for more////
//// details. http://www.gnu.org/licenses/lgpl.html              ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
//---------------------------------------------------------
//-- File generated by RobustVerilog parser
//-- Version: 1.0
//-- Invoked Fri Mar 25 23:33:02 2011
//--
//-- Source file: dma_ch.v
//---------------------------------------------------------
 
 
 
 
module dma_ahb64_core0_ch_empty (clk,reset,scan_en,pclk,clken,pclken,psel,penable,paddr,pwrite,pwdata,prdata,pslverr,periph_tx_req,periph_tx_clr,periph_rx_req,periph_rx_clr,rd_cmd_split,rd_cmd_line,rd_clr_line,rd_clr,rd_clr_load,rd_slverr,rd_decerr,wr_cmd_split,wr_cmd_pending,wr_clr_line,wr_clr,wr_clr_last,wr_slverr,wr_decerr,load_wr,load_wr_cycle,load_wdata,load_req_in_prog,int_all_proc,ch_start,idle,ch_active,ch_rd_active,ch_wr_active,wr_last_cmd,rd_line_cmd,wr_line_cmd,rd_go_next_line,wr_go_next_line,rd_ready,rd_burst_start,rd_burst_addr,rd_burst_size,rd_tokens,rd_port_num,rd_periph_delay,rd_clr_valid,rd_transfer,rd_transfer_size,rd_clr_stall,wr_ready,wr_burst_start,wr_burst_addr,wr_burst_size,wr_tokens,wr_port_num,wr_periph_delay,wr_clr_valid,wr_transfer,wr_transfer_size,wr_next_size,wr_clr_stall,wr_incr,timeout_aw,timeout_w,timeout_ar,wdt_timeout,fifo_wr,fifo_wdata,fifo_wsize,fifo_rd,fifo_rsize,fifo_rd_valid,fifo_rdata,fifo_wr_ready,joint_mode,joint_remote,rd_page_cross,wr_page_cross,joint_in_prog,joint_not_in_prog,joint_mux_in_prog,joint_req);
 
   input             clk;
   input             reset;
   input             scan_en;
 
   input             pclk;
   input             clken;
   input             pclken;
   input             psel;
   input             penable;
   input [7:0]             paddr;
   input             pwrite;
   input [31:0]         pwdata;
   output [31:0]         prdata;
   output             pslverr;
 
   input [31:1]         periph_tx_req;
   output [31:1]         periph_tx_clr;
   input [31:1]         periph_rx_req;
   output [31:1]         periph_rx_clr;
 
   input             rd_cmd_split;
   input             rd_cmd_line;
   input             rd_clr_line;
   input             rd_clr;
   input             rd_clr_load;
   input             rd_slverr;
   input             rd_decerr;
 
   input             wr_cmd_split;
   input             wr_cmd_pending;
   input             wr_clr_line;
   input             wr_clr;
   input             wr_clr_last;
   input             wr_slverr;
   input             wr_decerr;
 
   input             load_wr;
   input [1:0]             load_wr_cycle;
   input [64-1:0]    load_wdata;
   output             load_req_in_prog;
 
   output [1-1:0]    int_all_proc;
   input              ch_start;
   output             idle;
   output             ch_active;
   output             ch_rd_active;
   output             ch_wr_active;
   output             wr_last_cmd;
   output             rd_line_cmd;
   output             wr_line_cmd;
   output             rd_go_next_line;
   output             wr_go_next_line;
 
   output             rd_ready;
   input             rd_burst_start;
   output [32-1:0]   rd_burst_addr;
   output [8-1:0]  rd_burst_size;
   output [`TOKEN_BITS-1:0] rd_tokens;
   output             rd_port_num;
   output [`DELAY_BITS-1:0] rd_periph_delay;
   output             rd_clr_valid;
   input             rd_transfer;
   input [4-1:0]    rd_transfer_size;
   output             rd_clr_stall;
 
   output             wr_ready;
   input             wr_burst_start;
   output [32-1:0]   wr_burst_addr;
   output [8-1:0]  wr_burst_size;
   output [`TOKEN_BITS-1:0] wr_tokens;
   output             wr_port_num;
   output [`DELAY_BITS-1:0] wr_periph_delay; 
   output             wr_clr_valid;
   input             wr_transfer;
   input [4-1:0]    wr_transfer_size;
   input [4-1:0]    wr_next_size;
   output             wr_clr_stall;
   output             wr_incr;
 
   input              timeout_aw;
   input              timeout_w;
   input              timeout_ar;
   input             wdt_timeout;
 
   input             fifo_wr;
   input [64-1:0]    fifo_wdata;
   input [4-1:0]    fifo_wsize;
 
   input             fifo_rd;
   input [4-1:0]    fifo_rsize;
 
   output             fifo_rd_valid;
   output [64-1:0]   fifo_rdata;
   output             fifo_wr_ready;
 
   input             joint_mode;
   input             joint_remote;
   input             rd_page_cross;
   input             wr_page_cross;
   output             joint_in_prog;
   output             joint_not_in_prog;
   output             joint_mux_in_prog;
   output             joint_req;
 
 
   assign             prdata            = 'd0;
   assign             pslverr           = 'd1; //return error
   assign             periph_tx_clr     = 'd0;
   assign             periph_rx_clr     = 'd0;
   assign             load_req_in_prog  = 'd0;
   assign             int_all_proc      = 'd0;
   assign             idle              = 'd1;
   assign             ch_active         = 'd0;
   assign             ch_rd_active      = 'd0;
   assign             ch_wr_active      = 'd0;
   assign             wr_last_cmd       = 'd0;
   assign             rd_line_cmd       = 'd0;
   assign             wr_line_cmd       = 'd0;
   assign             rd_go_next_line   = 'd0;
   assign             wr_go_next_line   = 'd0;
   assign             rd_ready          = 'd0;
   assign             rd_burst_addr     = 'd0;
   assign             rd_burst_size     = 'd0;
   assign             rd_tokens         = 'd0;
   assign             rd_port_num       = 'd0;
   assign             rd_periph_delay   = 'd0;
   assign             rd_clr_valid      = 'd0;
   assign             rd_clr_stall      = 'd0;
   assign             wr_ready          = 'd0;
   assign             wr_burst_addr     = 'd0;
   assign             wr_burst_size     = 'd0;
   assign             wr_tokens         = 'd0;
   assign             wr_port_num       = 'd0;
   assign             wr_periph_delay   = 'd0;
   assign             wr_clr_valid      = 'd0;
   assign             wr_clr_stall      = 'd0;
   assign             wr_incr           = 'd0;
   assign             fifo_rd_valid     = 'd0;
   assign             fifo_rdata        = 'd0;
   assign             fifo_wr_ready     = 'd0;
   assign             joint_in_prog     = 'd0;
   assign             joint_not_in_prog = 'd0;
   assign             joint_mux_in_prog = 'd0;
   assign             joint_req         = 'd0;
 
 
 
endmodule