URL
https://opencores.org/ocsvn/gpib_controller/gpib_controller/trunk
Subversion Repositories gpib_controller
[/] [gpib_controller/] [trunk/] [vhdl/] [src/] [gpib/] [commandDecoder.vhd] - Rev 3
Go to most recent revision | Compare with Previous | Blame | View Log
-------------------------------------------------------------------------------- -- Entity: commandDecoder -- Date:2011-10-07 -- Author: apaluch -------------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use work.utilPkg.all; entity commandDecoder is port ( ------------------------------------------- -- data lines ----------------------------- ------------------------------------------- DI : in std_logic_vector (7 downto 0); ------------------------------------------- -- control lines -------------------------- ------------------------------------------- -- DAV line DAV_line : in std_logic; -- NRFD line NRFD_line : in std_logic; -- NDAC line NDAC_line : in std_logic; -- ATN line ATN_line : in std_logic; -- EOI line EOI_line : in std_logic; -- SRQ line SRQ_line : in std_logic; -- IFC line IFC_line : in std_logic; -- REN line REN_line : in std_logic; ------------------------------------------- -- internal settiongs --------------------- ------------------------------------------- -- eos mark eosMark : in std_logic_vector (7 downto 0); -- eos used eosUsed : in std_logic; -- my listen address myListAddr : in std_logic_vector (4 downto 0); -- my talk address myTalkAddr : in std_logic_vector (4 downto 0); -- secondary address detected secAddrDetected : in std_logic; ------------------------------------------- -- internal states ------------------------ ------------------------------------------- -- serial poll active state (T or TE) SPAS : in std_logic; ------------------------------------------- -- single line commands ------------------- ------------------------------------------- -- attention ATN : out std_logic; -- data accepted DAC : out std_logic; -- data valid DAV : out std_logic; -- end END_c : out std_logic; -- identify IDY : out std_logic; -- interface clear IFC : out std_logic; -- remote enable REN : out std_logic; -- ready for data RFD : out std_logic; -- service request SRQ : out std_logic; ------------------------------------------- -- multi line commands -------------------- ------------------------------------------- -- addressed command group ACG : out std_logic; -- data byte DAB : out std_logic; -- device clear DCL : out std_logic; -- end of string EOS : out std_logic; -- group execute trigger GET : out std_logic; -- go to local GTL : out std_logic; -- listen address group LAG : out std_logic; -- local lockout LLO : out std_logic; -- my listen address MLA : out std_logic; -- my talk address MTA : out std_logic; -- my secondary address MSA : out std_logic; -- null byte NUL : out std_logic; -- other secondary address OSA : out std_logic; -- other talk address OTA : out std_logic; -- primary command group PCG : out std_logic; -- parallel poll configure PPC : out std_logic; -- parallel poll enable PPE : out std_logic; -- parallel poll disable PPD : out std_logic; -- parallel poll response PPR : out std_logic; -- parallel poll unconfigure PPU : out std_logic; -- request service RQS : out std_logic; -- secondary command group SCG : out std_logic; -- selected device clear SDC : out std_logic; -- serial poll disable SPD : out std_logic; -- serial poll enable SPE : out std_logic; -- status byte STB : out std_logic; -- talk address group TAG : out std_logic; -- take control TCT : out std_logic; -- universal command group UCG : out std_logic; -- unlisten UNL : out std_logic; -- untalk UNT : out std_logic ); end commandDecoder; architecture arch of commandDecoder is signal ATN_int, IDY_int : std_logic; signal SCG_int, MSA_int, TAG_int, MTA_int, ACG_int, UCG_int, LAG_int, STB_int : std_logic; begin -------------------------------------- -- single line -------------------------------------- ATN_int <= ATN_line; ATN <= ATN_int; ---------------------- DAC <= not NDAC_line; ---------------------- DAV <= DAV_line; ---------------------- END_c <= not ATN_line and EOI_line; ---------------------- IDY_int <= ATN_line and EOI_line; IDY <= IDY_int; ---------------------- IFC <= IFC_line; ---------------------- REN <= REN_line; ---------------------- RFD <= not NRFD_line; ---------------------- SRQ <= SRQ_line; --------------------------------------- -- multiple line --------------------------------------- ACG_int <= ATN_int and to_stdl(DI(6 downto 4) = "000"); ACG <= ACG_int; --------------------------------------- DAB <= not ATN_int and ((eosUsed and to_stdl(DI /= eosMark)) or not eosUsed); --------------------------------------- DCL <= ATN_int and to_stdl(DI(6 downto 0) = "0010100"); --------------------------------------- EOS <= not ATN_int and eosUsed and to_stdl(DI = eosMark); --------------------------------------- GET <= ATN_int and to_stdl(DI(6 downto 0) = "0001000"); --------------------------------------- GTL <= ATN_int and to_stdl(DI(6 downto 0) = "0000001"); --------------------------------------- LAG_int <= ATN_int and to_stdl(DI(6 downto 5) = "01"); LAG <= LAG_int; --------------------------------------- LLO <= ATN_int and to_stdl(DI(6 downto 0) = "0010001"); --------------------------------------- MLA <= LAG_int and to_stdl(DI(4 downto 0) = myListAddr); --------------------------------------- MTA_int <= TAG_int and to_stdl(DI(4 downto 0) = myTalkAddr); MTA <= MTA_int; --------------------------------------- MSA_int <= SCG_int and secAddrDetected; MSA <= MSA_int; --------------------------------------- NUL <= ATN_int and to_stdl(DI = "00000000"); --------------------------------------- OSA <= SCG_int and not MSA_int; --------------------------------------- OTA <= TAG_int and not MTA_int; --------------------------------------- PCG <= ACG_int or UCG_int or LAG_int or TAG_int; --------------------------------------- PPC <= ATN_int and to_stdl(DI(6 downto 0) = "0000101"); --------------------------------------- PPE <= ATN_int and to_stdl(DI(6 downto 4) = "110"); --------------------------------------- PPD <= ATN_int and to_stdl(DI(6 downto 4) = "111"); -- "-1110000" ? --------------------------------------- PPR <= ATN_int and IDY_int; --------------------------------------- PPU <= ATN_int and to_stdl(DI(6 downto 0) = "0010101"); --------------------------------------- RQS <= STB_int and to_stdl(DI(6) = '1'); --------------------------------------- SCG_int <= ATN_int and to_stdl(DI(6 downto 5) = "11"); SCG <= SCG_int; --------------------------------------- SDC <= ATN_int and to_stdl(DI(6 downto 0) = "0000100"); --------------------------------------- SPD <= ATN_int and to_stdl(DI(6 downto 0) = "0011001"); --------------------------------------- SPE <= ATN_int and to_stdl(DI(6 downto 0) = "0011000"); --------------------------------------- STB_int <= not ATN_int and SPAS; STB <= STB_int; --------------------------------------- TAG_int <= ATN_int and to_stdl(DI(6 downto 5) = "10"); TAG <= TAG_int; --------------------------------------- TCT <= ATN_int and to_stdl(DI(6 downto 0) = "0001001"); --------------------------------------- UCG_int <= ATN_int and to_stdl(DI(6 downto 4) = "001"); UCG <= UCG_int; --------------------------------------- UNL <= ATN_int and to_stdl(DI(6 downto 0) = "0111111"); --------------------------------------- UNT <= ATN_int and to_stdl(DI(6 downto 0) = "1011111"); end arch;
Go to most recent revision | Compare with Previous | Blame | View Log