Subversion Repositories gpib_controller

--------------------------------------------------------------------------------
--This file is part of fpga_gpib_controller.
--
-- Fpga_gpib_controller is free software: you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation, either version 3 of the License, or
-- (at your option) any later version.
--
-- Fpga_gpib_controller is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- GNU General Public License for more details.
 
-- You should have received a copy of the GNU General Public License
-- along with Fpga_gpib_controller.  If not, see <http://www.gnu.org/licenses/>.
--------------------------------------------------------------------------------
-- Entity: SettingsReg0
-- Date:2011-11-09  
-- Author: Andrzej Paluch
--
-- Description ${cursor}
--------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
 
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
 
entity SettingsReg0 is
	port (
		reset : in std_logic;
		strobe : in std_logic;
		data_in : in std_logic_vector (15 downto 0);
		data_out : out std_logic_vector (15 downto 0);
		------------- gpib -----------------------------
		isLE_TE : out std_logic;
		lpeUsed : out std_logic;
		fixedPpLine : out std_logic_vector (2 downto 0);
		eosUsed : out std_logic;
		eosMark : out std_logic_vector (7 downto 0);
		lon : out std_logic;
		ton : out std_logic
	);
end SettingsReg0;
 
architecture arch of SettingsReg0 is
 
	signal inner_buf : std_logic_vector (15 downto 0);
 
begin
 
	data_out <= inner_buf;
 
	isLE_TE <= inner_buf(0);
	lpeUsed <= inner_buf(1);
	fixedPpLine <= inner_buf(4 downto 2);
	eosUsed <= inner_buf(5);
	eosMark <= inner_buf(13 downto 6);
	lon <= inner_buf(14);
	ton <= inner_buf(15);
 
	process (reset, strobe) begin
		if reset = '1' then
			inner_buf <= "0000000000000000";
		elsif rising_edge(strobe) then
			inner_buf <= data_in;
		end if;
	end process;
 
end arch;