URL
https://opencores.org/ocsvn/gpib_controller/gpib_controller/trunk
Subversion Repositories gpib_controller
[/] [gpib_controller/] [trunk/] [vhdl/] [test/] [gpibInterfaceTest.vhd] - Rev 3
Go to most recent revision | Compare with Previous | Blame | View Log
-------------------------------------------------------------------------------- -- Company: -- Engineer: -- -- Create Date: 23:21:05 10/21/2011 -- Design Name: -- Module Name: /windows/h/projekty/elektronika/USB_to_HPIB/usbToHpib/test_scr//gpibInterfaceTest.vhd -- Project Name: usbToHpib -- Target Device: -- Tool versions: -- Description: -- -- VHDL Test Bench Created by ISE for module: gpibInterface -- -- Dependencies: -- -- Revision: -- Revision 0.01 - File Created -- Additional Comments: -- -- Notes: -- This testbench has been automatically generated using types std_logic and -- std_logic_vector for the ports of the unit under test. Xilinx recommends -- that these types always be used for the top-level I/O of a design in order -- to guarantee that the testbench will bind correctly to the post-implementation -- simulation model. -------------------------------------------------------------------------------- LIBRARY ieee; USE ieee.std_logic_1164.ALL; USE ieee.std_logic_unsigned.all; USE ieee.numeric_std.ALL; use work.gpibComponents.all; use work.helperComponents.all; ENTITY gpibInterfaceTest IS END gpibInterfaceTest; ARCHITECTURE behavior OF gpibInterfaceTest IS -- Component Declaration for the Unit Under Test (UUT) component gpibCableEmulator is port ( -- interface signals DIO_1 : in std_logic_vector (7 downto 0); output_valid_1 : in std_logic; DIO_2 : in std_logic_vector (7 downto 0); output_valid_2 : in std_logic; DIO : out std_logic_vector (7 downto 0); -- attention ATN_1 : in std_logic; ATN_2 : in std_logic; ATN : out std_logic; -- data valid DAV_1 : in std_logic; DAV_2 : in std_logic; DAV : out std_logic; -- not ready for data NRFD_1 : in std_logic; NRFD_2 : in std_logic; NRFD : out std_logic; -- no data accepted NDAC_1 : in std_logic; NDAC_2 : in std_logic; NDAC : out std_logic; -- end or identify EOI_1 : in std_logic; EOI_2 : in std_logic; EOI : out std_logic; -- service request SRQ_1 : in std_logic; SRQ_2 : in std_logic; SRQ : out std_logic; -- interface clear IFC_1 : in std_logic; IFC_2 : in std_logic; IFC : out std_logic; -- remote enable REN_1 : in std_logic; REN_2 : in std_logic; REN : out std_logic ); end component; -- inputs common signal clk : std_logic := '0'; signal reset : std_logic := '0'; signal T1 : std_logic_vector(7 downto 0) := "00000100"; -- inputs 1 signal data_1 : std_logic_vector(7 downto 0) := (others => '0'); signal status_byte_1 : std_logic_vector(7 downto 0) := (others => '0'); signal rdy_1 : std_logic := '0'; signal nba_1 : std_logic := '0'; signal ltn_1 : std_logic := '0'; signal lun_1 : std_logic := '0'; signal lon_1 : std_logic := '0'; signal ton_1 : std_logic := '0'; signal endOf_1 : std_logic := '0'; signal gts_1 : std_logic := '0'; signal rpp_1 : std_logic := '0'; signal tcs_1 : std_logic := '0'; signal tca_1 : std_logic := '0'; signal sic_1 : std_logic := '0'; signal rsc_1 : std_logic := '0'; signal sre_1 : std_logic := '0'; signal rtl_1 : std_logic := '0'; signal rsv_1 : std_logic := '0'; signal ist_1 : std_logic := '0'; signal lpe_1 : std_logic := '0'; -- inputs 2 signal data_2 : std_logic_vector(7 downto 0) := (others => '0'); signal status_byte_2 : std_logic_vector(7 downto 0) := (others => '0'); signal rdy_2 : std_logic := '0'; signal nba_2 : std_logic := '0'; signal ltn_2 : std_logic := '0'; signal lun_2 : std_logic := '0'; signal lon_2 : std_logic := '0'; signal ton_2 : std_logic := '0'; signal endOf_2 : std_logic := '0'; signal gts_2 : std_logic := '0'; signal rpp_2 : std_logic := '0'; signal tcs_2 : std_logic := '0'; signal tca_2 : std_logic := '0'; signal sic_2 : std_logic := '0'; signal rsc_2 : std_logic := '0'; signal sre_2 : std_logic := '0'; signal rtl_2 : std_logic := '0'; signal rsv_2 : std_logic := '0'; signal ist_2 : std_logic := '0'; signal lpe_2 : std_logic := '0'; -- outputs 1 signal dvd_1 : std_logic; signal wnc_1 : std_logic; signal tac_1 : std_logic; signal cwrc_1 : std_logic; signal cwrd_1 : std_logic; signal clr_1 : std_logic; signal trg_1 : std_logic; signal atl_1 : std_logic; signal att_1 : std_logic; signal mla_1 : std_logic; signal lsb_1 : std_logic; signal spa_1 : std_logic; signal ppr_1 : std_logic; signal sreq_1 : std_logic; signal isLocal_1 : std_logic; signal currentSecAddr_1 : std_logic_vector (4 downto 0); -- outputs 2 signal dvd_2 : std_logic; signal wnc_2 : std_logic; signal tac_2 : std_logic; signal cwrc_2 : std_logic; signal cwrd_2 : std_logic; signal clr_2 : std_logic; signal trg_2 : std_logic; signal atl_2 : std_logic; signal att_2 : std_logic; signal mla_2 : std_logic; signal lsb_2 : std_logic; signal spa_2 : std_logic; signal ppr_2 : std_logic; signal sreq_2 : std_logic; signal isLocal_2 : std_logic; signal currentSecAddr_2 : std_logic_vector (4 downto 0); -- common signal DO : std_logic_vector (7 downto 0); signal DI_1 : std_logic_vector (7 downto 0); signal output_valid_1 : std_logic; signal DI_2 : std_logic_vector (7 downto 0); signal output_valid_2 : std_logic; signal ATN_1, ATN_2, ATN : std_logic; signal DAV_1, DAV_2, DAV : std_logic; signal NRFD_1, NRFD_2, NRFD : std_logic; signal NDAC_1, NDAC_2, NDAC : std_logic; signal EOI_1, EOI_2, EOI : std_logic; signal SRQ_1, SRQ_2, SRQ : std_logic; signal IFC_1, IFC_2, IFC : std_logic; signal REN_1, REN_2, REN : std_logic; -- Clock period definitions constant clk_period : time := 2ps; BEGIN -- Instantiate the Unit Under Test (UUT) gpib1: gpibInterface PORT MAP ( clk => clk, reset => reset, isLE => '0', isTE => '0', lpeUsed => '0', fixedPpLine => "000", eosUsed => '0', eosMark => "00000000", myListAddr => "00001", myTalkAddr => "00001", secAddrMask => (others => '0'), data => data_1, status_byte => status_byte_1, T1 => T1, rdy => rdy_1, nba => nba_1, ltn => ltn_1, lun => lun_1, lon => lon_1, ton => ton_1, endOf => endOf_1, gts => gts_1, rpp => rpp_1, tcs => tcs_1, tca => tca_1, sic => sic_1, rsc => rsc_1, sre => sre_1, rtl => rtl_1, rsv => rsv_1, ist => ist_1, lpe => lpe_1, dvd => dvd_1, wnc => wnc_1, tac => tac_1, cwrc => cwrc_1, cwrd => cwrd_1, clr => clr_1, trg => trg_1, atl => atl_1, att => att_1, mla => mla_1, lsb => lsb_1, spa => spa_1, ppr => ppr_1, sreq => sreq_1, isLocal => isLocal_1, currentSecAddr => currentSecAddr_1, DI => DO, DO => DI_1, output_valid => output_valid_1, ATN_in => ATN, ATN_out => ATN_1, DAV_in => DAV, DAV_out => DAV_1, NRFD_in => NRFD, NRFD_out => NRFD_1, NDAC_in => NDAC, NDAC_out => NDAC_1, EOI_in => EOI, EOI_out => EOI_1, SRQ_in => SRQ, SRQ_out => SRQ_1, IFC_in => IFC, IFC_out => IFC_1, REN_in => REN, REN_out => REN_1 ); -- Instantiate the Unit Under Test (UUT) gpib2: gpibInterface PORT MAP ( clk => clk, reset => reset, isLE => '0', isTE => '0', lpeUsed => '0', fixedPpLine => "000", eosUsed => '0', eosMark => "00000000", myListAddr => "00010", myTalkAddr => "00010", secAddrMask => (others => '0'), data => data_2, status_byte => status_byte_2, T1 => T1, rdy => rdy_2, nba => nba_2, ltn => ltn_2, lun => lun_2, lon => lon_2, ton => ton_2, endOf => endOf_2, gts => gts_2, rpp => rpp_2, tcs => tcs_2, tca => tca_2, sic => sic_2, rsc => rsc_2, sre => sre_2, rtl => rtl_2, rsv => rsv_2, ist => ist_2, lpe => lpe_2, dvd => dvd_2, wnc => wnc_2, tac => tac_2, cwrc => cwrc_2, cwrd => cwrd_2, clr => clr_2, trg => trg_2, atl => atl_2, att => att_2, mla => mla_2, lsb => lsb_2, spa => spa_2, ppr => ppr_2, sreq => sreq_2, isLocal => isLocal_2, currentSecAddr => currentSecAddr_2, DI => DO, DO => DI_2, output_valid => output_valid_2, ATN_in => ATN, ATN_out => ATN_2, DAV_in => DAV, DAV_out => DAV_2, NRFD_in => NRFD, NRFD_out => NRFD_2, NDAC_in => NDAC, NDAC_out => NDAC_2, EOI_in => EOI, EOI_out => EOI_2, SRQ_in => SRQ, SRQ_out => SRQ_2, IFC_in => IFC, IFC_out => IFC_2, REN_in => REN, REN_out => REN_2 ); ce: gpibCableEmulator port map ( -- interface signals DIO_1 => DI_1, output_valid_1 => output_valid_1, DIO_2 => DI_2, output_valid_2 => output_valid_2, DIO => DO, -- attention ATN_1 => ATN_1, ATN_2 => ATN_2, ATN => ATN, DAV_1 => DAV_1, DAV_2 => DAV_2, DAV => DAV, NRFD_1 => NRFD_1, NRFD_2 => NRFD_2, NRFD => NRFD, NDAC_1 => NDAC_1, NDAC_2 => NDAC_2, NDAC => NDAC, EOI_1 => EOI_1, EOI_2 => EOI_2, EOI => EOI, SRQ_1 => SRQ_1, SRQ_2 => SRQ_2, SRQ => SRQ, IFC_1 => IFC_1, IFC_2 => IFC_2, IFC => IFC, REN_1 => REN_1, REN_2 => REN_2, REN => REN ); -- Clock process definitions clk_process :process begin clk <= '0'; wait for clk_period/2; clk <= '1'; wait for clk_period/2; end process; -- Stimulus process stim_proc: process begin -- hold reset state for 10 clock periods. reset <= '1'; wait for clk_period*10; reset <= '0'; wait for clk_period*10; -- requests system control rsc_1 <= '1'; -- interface clear sic_1 <= '1'; wait for clk_period*2; sic_1 <= '0'; wait until ifc_1='0'; -- address gpib2 to listen data_1 <= "00100010"; nba_1 <= '1'; wait until DAV='1'; nba_1 <= '0'; wait for clk_period*20; -- address gpib1 to talk data_1 <= "01000001"; wait for clk_period*1; nba_1 <= '1'; wait until DAV='1'; nba_1 <= '0'; wait for clk_period*30; gts_1 <= '1'; wait until tac_1='1'; -- send data to gpib2 rdy_2 <= '1'; wait until NRFD='0'; data_1 <= "10101010"; nba_1 <= '1'; wait until DAV_1='1'; nba_1 <= '0'; wait until dvd_2='1'; rdy_2 <= '0'; wait until NDAC_2='0'; rdy_2 <= '1'; -- send end data to gpib2 wait until NRFD='0'; data_1 <= "10101010"; endOf_1 <= '1'; nba_1 <= '1'; wait until DAV_1='1'; nba_1 <= '0'; wait until dvd_2='1'; rdy_2 <= '0'; wait until NDAC_2='0'; rdy_2 <= '1'; wait; end process; END;
Go to most recent revision | Compare with Previous | Blame | View Log