URL
https://opencores.org/ocsvn/uart2bus_testbench/uart2bus_testbench/trunk
Subversion Repositories uart2bus_testbench
[/] [uart2bus_testbench/] [trunk/] [tb/] [uvm_src/] [base/] [uvm_config_db.svh] - Rev 16
Compare with Previous | Blame | View Log
//----------------------------------------------------------------------
// Copyright 2011 Cypress Semiconductor
// Copyright 2010-2011 Mentor Graphics Corporation
// Copyright 2014 NVIDIA Corporation
// All Rights Reserved Worldwide
//
// Licensed under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in
// compliance with the License. You may obtain a copy of
// the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in
// writing, software distributed under the License is
// distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See
// the License for the specific language governing
// permissions and limitations under the License.
//----------------------------------------------------------------------
typedef class uvm_phase;
//----------------------------------------------------------------------
// Title: UVM Configuration Database
//
// Topic: Intro
//
// The <uvm_config_db> class provides a convenience interface
// on top of the <uvm_resource_db> to simplify the basic interface
// that is used for configuring <uvm_component> instances.
//
// If the run-time ~+UVM_CONFIG_DB_TRACE~ command line option is specified,
// all configuration DB accesses (read and write) are displayed.
//----------------------------------------------------------------------
//Internal class for config waiters
class m_uvm_waiter;
string inst_name;
string field_name;
event trigger;
function new (string inst_name, string field_name);
this.inst_name = inst_name;
this.field_name = field_name;
endfunction
endclass
typedef class uvm_root;
typedef class uvm_config_db_options;
//----------------------------------------------------------------------
// class: uvm_config_db
//
// All of the functions in uvm_config_db#(T) are static, so they
// must be called using the :: operator. For example:
//
//| uvm_config_db#(int)::set(this, "*", "A");
//
// The parameter value "int" identifies the configuration type as
// an int property.
//
// The <set> and <get> methods provide the same API and
// semantics as the set/get_config_* functions in <uvm_component>.
//----------------------------------------------------------------------
class uvm_config_db#(type T=int) extends uvm_resource_db#(T);
// Internal lookup of config settings so they can be reused
// The context has a pool that is keyed by the inst/field name.
static uvm_pool#(string,uvm_resource#(T)) m_rsc[uvm_component];
// Internal waiter list for wait_modified
static local uvm_queue#(m_uvm_waiter) m_waiters[string];
// function: get
//
// Get the value for ~field_name~ in ~inst_name~, using component ~cntxt~ as
// the starting search point. ~inst_name~ is an explicit instance name
// relative to ~cntxt~ and may be an empty string if the ~cntxt~ is the
// instance that the configuration object applies to. ~field_name~
// is the specific field in the scope that is being searched for.
//
// The basic ~get_config_*~ methods from <uvm_component> are mapped to
// this function as:
//
//| get_config_int(...) => uvm_config_db#(uvm_bitstream_t)::get(cntxt,...)
//| get_config_string(...) => uvm_config_db#(string)::get(cntxt,...)
//| get_config_object(...) => uvm_config_db#(uvm_object)::get(cntxt,...)
static function bit get(uvm_component cntxt,
string inst_name,
string field_name,
inout T value);
//TBD: add file/line
int unsigned p;
uvm_resource#(T) r, rt;
uvm_resource_pool rp = uvm_resource_pool::get();
uvm_resource_types::rsrc_q_t rq;
uvm_coreservice_t cs = uvm_coreservice_t::get();
if(cntxt == null)
cntxt = cs.get_root();
if(inst_name == "")
inst_name = cntxt.get_full_name();
else if(cntxt.get_full_name() != "")
inst_name = {cntxt.get_full_name(), ".", inst_name};
rq = rp.lookup_regex_names(inst_name, field_name, uvm_resource#(T)::get_type());
r = uvm_resource#(T)::get_highest_precedence(rq);
if(uvm_config_db_options::is_tracing())
m_show_msg("CFGDB/GET", "Configuration","read", inst_name, field_name, cntxt, r);
if(r == null)
return 0;
value = r.read(cntxt);
return 1;
endfunction
// function: set
//
// Create a new or update an existing configuration setting for
// ~field_name~ in ~inst_name~ from ~cntxt~.
// The setting is made at ~cntxt~, with the full scope of the set
// being {~cntxt~,".",~inst_name~}. If ~cntxt~ is ~null~ then ~inst_name~
// provides the complete scope information of the setting.
// ~field_name~ is the target field. Both ~inst_name~ and ~field_name~
// may be glob style or regular expression style expressions.
//
// If a setting is made at build time, the ~cntxt~ hierarchy is
// used to determine the setting's precedence in the database.
// Settings from hierarchically higher levels have higher
// precedence. Settings from the same level of hierarchy have
// a last setting wins semantic. A precedence setting of
// <uvm_resource_base::default_precedence> is used for uvm_top, and
// each hierarchical level below the top is decremented by 1.
//
// After build time, all settings use the default precedence and thus
// have a last wins semantic. So, if at run time, a low level
// component makes a runtime setting of some field, that setting
// will have precedence over a setting from the test level that was
// made earlier in the simulation.
//
// The basic ~set_config_*~ methods from <uvm_component> are mapped to
// this function as:
//
//| set_config_int(...) => uvm_config_db#(uvm_bitstream_t)::set(cntxt,...)
//| set_config_string(...) => uvm_config_db#(string)::set(cntxt,...)
//| set_config_object(...) => uvm_config_db#(uvm_object)::set(cntxt,...)
static function void set(uvm_component cntxt,
string inst_name,
string field_name,
T value);
uvm_root top;
uvm_phase curr_phase;
uvm_resource#(T) r;
bit exists;
string lookup;
uvm_pool#(string,uvm_resource#(T)) pool;
string rstate;
uvm_coreservice_t cs = uvm_coreservice_t::get();
//take care of random stability during allocation
process p = process::self();
if(p != null)
rstate = p.get_randstate();
top = cs.get_root();
curr_phase = top.m_current_phase;
if(cntxt == null)
cntxt = top;
if(inst_name == "")
inst_name = cntxt.get_full_name();
else if(cntxt.get_full_name() != "")
inst_name = {cntxt.get_full_name(), ".", inst_name};
if(!m_rsc.exists(cntxt)) begin
m_rsc[cntxt] = new;
end
pool = m_rsc[cntxt];
// Insert the token in the middle to prevent cache
// oddities like i=foobar,f=xyz and i=foo,f=barxyz.
// Can't just use '.', because '.' isn't illegal
// in field names
lookup = {inst_name, "__M_UVM__", field_name};
if(!pool.exists(lookup)) begin
r = new(field_name, inst_name);
pool.add(lookup, r);
end
else begin
r = pool.get(lookup);
exists = 1;
end
if(curr_phase != null && curr_phase.get_name() == "build")
r.precedence = uvm_resource_base::default_precedence - (cntxt.get_depth());
else
r.precedence = uvm_resource_base::default_precedence;
r.write(value, cntxt);
if(exists) begin
uvm_resource_pool rp = uvm_resource_pool::get();
rp.set_priority_name(r, uvm_resource_types::PRI_HIGH);
end
else begin
//Doesn't exist yet, so put it in resource db at the head.
r.set_override();
end
//trigger any waiters
if(m_waiters.exists(field_name)) begin
m_uvm_waiter w;
for(int i=0; i<m_waiters[field_name].size(); ++i) begin
w = m_waiters[field_name].get(i);
if(uvm_re_match(uvm_glob_to_re(inst_name),w.inst_name) == 0)
->w.trigger;
end
end
if(p != null)
p.set_randstate(rstate);
if(uvm_config_db_options::is_tracing())
m_show_msg("CFGDB/SET", "Configuration","set", inst_name, field_name, cntxt, r);
endfunction
// function: exists
//
// Check if a value for ~field_name~ is available in ~inst_name~, using
// component ~cntxt~ as the starting search point. ~inst_name~ is an explicit
// instance name relative to ~cntxt~ and may be an empty string if the
// ~cntxt~ is the instance that the configuration object applies to.
// ~field_name~ is the specific field in the scope that is being searched for.
// The ~spell_chk~ arg can be set to 1 to turn spell checking on if it
// is expected that the field should exist in the database. The function
// returns 1 if a config parameter exists and 0 if it doesn't exist.
//
static function bit exists(uvm_component cntxt, string inst_name,
string field_name, bit spell_chk=0);
uvm_coreservice_t cs = uvm_coreservice_t::get();
if(cntxt == null)
cntxt = cs.get_root();
if(inst_name == "")
inst_name = cntxt.get_full_name();
else if(cntxt.get_full_name() != "")
inst_name = {cntxt.get_full_name(), ".", inst_name};
return (uvm_resource_db#(T)::get_by_name(inst_name,field_name,spell_chk) != null);
endfunction
// Function: wait_modified
//
// Wait for a configuration setting to be set for ~field_name~
// in ~cntxt~ and ~inst_name~. The task blocks until a new configuration
// setting is applied that effects the specified field.
static task wait_modified(uvm_component cntxt, string inst_name,
string field_name);
process p = process::self();
string rstate = p.get_randstate();
m_uvm_waiter waiter;
uvm_coreservice_t cs = uvm_coreservice_t::get();
if(cntxt == null)
cntxt = cs.get_root();
if(cntxt != cs.get_root()) begin
if(inst_name != "")
inst_name = {cntxt.get_full_name(),".",inst_name};
else
inst_name = cntxt.get_full_name();
end
waiter = new(inst_name, field_name);
if(!m_waiters.exists(field_name))
m_waiters[field_name] = new;
m_waiters[field_name].push_back(waiter);
p.set_randstate(rstate);
// wait on the waiter to trigger
@waiter.trigger;
// Remove the waiter from the waiter list
for(int i=0; i<m_waiters[field_name].size(); ++i) begin
if(m_waiters[field_name].get(i) == waiter) begin
m_waiters[field_name].delete(i);
break;
end
end
endtask
endclass
// Section: Types
//----------------------------------------------------------------------
// Topic: uvm_config_int
//
// Convenience type for uvm_config_db#(uvm_bitstream_t)
//
//| typedef uvm_config_db#(uvm_bitstream_t) uvm_config_int;
typedef uvm_config_db#(uvm_bitstream_t) uvm_config_int;
//----------------------------------------------------------------------
// Topic: uvm_config_string
//
// Convenience type for uvm_config_db#(string)
//
//| typedef uvm_config_db#(string) uvm_config_string;
typedef uvm_config_db#(string) uvm_config_string;
//----------------------------------------------------------------------
// Topic: uvm_config_object
//
// Convenience type for uvm_config_db#(uvm_object)
//
//| typedef uvm_config_db#(uvm_object) uvm_config_object;
typedef uvm_config_db#(uvm_object) uvm_config_object;
//----------------------------------------------------------------------
// Topic: uvm_config_wrapper
//
// Convenience type for uvm_config_db#(uvm_object_wrapper)
//
//| typedef uvm_config_db#(uvm_object_wrapper) uvm_config_wrapper;
typedef uvm_config_db#(uvm_object_wrapper) uvm_config_wrapper;
//----------------------------------------------------------------------
// Class: uvm_config_db_options
//
// Provides a namespace for managing options for the
// configuration DB facility. The only thing allowed in this class is static
// local data members and static functions for manipulating and
// retrieving the value of the data members. The static local data
// members represent options and settings that control the behavior of
// the configuration DB facility.
// Options include:
//
// * tracing: on/off
//
// The default for tracing is off.
//
//----------------------------------------------------------------------
class uvm_config_db_options;
static local bit ready;
static local bit tracing;
// Function: turn_on_tracing
//
// Turn tracing on for the configuration database. This causes all
// reads and writes to the database to display information about
// the accesses. Tracing is off by default.
//
// This method is implicitly called by the ~+UVM_CONFIG_DB_TRACE~.
static function void turn_on_tracing();
if (!ready) init();
tracing = 1;
endfunction
// Function: turn_off_tracing
//
// Turn tracing off for the configuration database.
static function void turn_off_tracing();
if (!ready) init();
tracing = 0;
endfunction
// Function: is_tracing
//
// Returns 1 if the tracing facility is on and 0 if it is off.
static function bit is_tracing();
if (!ready) init();
return tracing;
endfunction
static local function void init();
uvm_cmdline_processor clp;
string trace_args[$];
clp = uvm_cmdline_processor::get_inst();
if (clp.get_arg_matches("+UVM_CONFIG_DB_TRACE", trace_args)) begin
tracing = 1;
end
ready = 1;
endfunction
endclass