URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] - Rev 22

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
22	Added files and instructions to enable the building of the vmlinux image from the kernel source files.	csantifort	5017d 03h	/
21	Fixed bug in the conditions to create the FPGA configuration log file. I added the creation of the log file in the last release, but the way it was implemented was causing the Makefile to always rebuild from the start.	csantifort	5017d 03h	/
20	Added feature to A25 core to directly use a read value from the write back stage to reduce the stall to 1 cycle when there is a register conflict with the following instruction. This increases performance by about 3%.	csantifort	5038d 04h	/
19	Create a configuration log file as part of the synthesis flow. This file is a useful reference to tell the different bitfiles apart.	csantifort	5038d 04h	/
18	Added list of source files and diagram for Amber25 core.	csantifort	5041d 03h	/
17	amber25 core bug fix. The return address for irq interrupts was off by 4 bytes when the interrupt occurred during a stm instruction with the following instruction having some register conflicts. Added test irq_stm to catch the bug. Cleaned up some header descriptions	csantifort	5042d 02h	/
16	Deleted the old version of the 3-state amber core. Its replaced with amber23. Added the 5-state Amber core.	csantifort	5044d 16h	/
15	Copied amber to amber23, Many system changes to support new amber25 core.	csantifort	5044d 16h	/
14	Re-wrote the behavioral clock generation code to more accurately calculate the sys_clk frequency. The previous version was not producing the correct frequency at higher frequenies due to rounding errors.	csantifort	5046d 04h	/
13	Bug fix - added an extra state to the rx state machine to properly align reading the uart input to the middle of each bit.	csantifort	5046d 04h	/
12	Added INITIALIZE_TO_ZERO parameter to keep instantiation idendical to generic sram models. The parameter is not used in the Xilinx models (they always init to zero) but it used in the generic models.	csantifort	5046d 04h	/
11	Added vmlinux test.	csantifort	5061d 04h	/
10	Removed parameters for unused peruipheral modules	csantifort	5062d 08h	/
9	Change the format of mcr and mrc listings so they exactly match the dissasembly produced by the gnu tools. Write ip instead of r12 in listings.	csantifort	5062d 08h	/
8	Change the value in the ID register to be compatible with the Linux code that parses it and picks a processor type.	csantifort	5062d 08h	/
7	Added instructions to use Veritak simulator. Removed some unused functions from memory_configuration.v.	csantifort	5070d 23h	/
6	Set ignore property for output files	csantifort	5074d 01h	/
5	Deleted two temporary files that should not be in the release.	csantifort	5074d 22h	/
4	Corrected a couple of minor typos	csantifort	5074d 22h	/
3	Added trunk to $AMBER_BASE path	csantifort	5075d 02h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories amber

[/] - Rev 22

Filtering Options