OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] - Rev 22

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
22 Added files and instructions to enable the building of the vmlinux image from the kernel source files. csantifort 5200d 20h /amber/
21 Fixed bug in the conditions to create the FPGA configuration log file. I added the creation of the log file in the last release, but the way it was implemented was causing the Makefile to always rebuild from the start. csantifort 5200d 20h /amber/
20 Added feature to A25 core to directly use a read value from the write back stage
to reduce the stall to 1 cycle when there is a register conflict with the
following instruction. This increases performance by about 3%.
csantifort 5221d 21h /amber/
19 Create a configuration log file as part of the synthesis flow. This file is a useful reference to
tell the different bitfiles apart.
csantifort 5221d 22h /amber/
18 Added list of source files and diagram for Amber25 core. csantifort 5224d 20h /amber/
17 amber25 core bug fix. The return address for irq interrupts was off by 4 bytes
when the interrupt occurred during a stm instruction with the following instruction
having some register conflicts. Added test irq_stm to catch the bug.
Cleaned up some header descriptions
csantifort 5225d 19h /amber/
16 Deleted the old version of the 3-state amber core. Its replaced with amber23.
Added the 5-state Amber core.
csantifort 5228d 10h /amber/
15 Copied amber to amber23, Many system changes to support new amber25 core. csantifort 5228d 10h /amber/
14 Re-wrote the behavioral clock generation code to more accurately
calculate the sys_clk frequency. The previous version was not
producing the correct frequency at higher frequenies due to
rounding errors.
csantifort 5229d 22h /amber/
13 Bug fix - added an extra state to the rx state machine to properly align
reading the uart input to the middle of each bit.
csantifort 5229d 22h /amber/
12 Added INITIALIZE_TO_ZERO parameter to keep instantiation
idendical to generic sram models. The parameter is not used
in the Xilinx models (they always init to zero) but it used
in the generic models.
csantifort 5229d 22h /amber/
11 Added vmlinux test. csantifort 5244d 22h /amber/
10 Removed parameters for unused peruipheral modules csantifort 5246d 02h /amber/
9 Change the format of mcr and mrc listings so they exactly match the dissasembly produced by the gnu tools.
Write ip instead of r12 in listings.
csantifort 5246d 02h /amber/
8 Change the value in the ID register to be compatible with the Linux code that parses it and picks a processor type. csantifort 5246d 02h /amber/
7 Added instructions to use Veritak simulator.
Removed some unused functions from memory_configuration.v.
csantifort 5254d 16h /amber/
6 Set ignore property for output files csantifort 5257d 19h /amber/
5 Deleted two temporary files that should not be in the release. csantifort 5258d 16h /amber/
4 Corrected a couple of minor typos csantifort 5258d 16h /amber/
3 Added trunk to $AMBER_BASE path csantifort 5258d 19h /amber/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.