URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] - Rev 59

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
59	Added modelsim script for reloading a wlf file after a simulation has been rerun.	csantifort	5151d 01h	/amber/
58	Use TB.clk_count for the decompiler messages and removed the local counter	csantifort	5151d 05h	/amber/
57	Add some debug messages	csantifort	5151d 05h	/amber/
56	Remove the timeouts file from svn. Its an output file and gets now just gets created automatically when sims are run for the first time.	csantifort	5151d 05h	/amber/
55	Added sudo to rm mnt command	csantifort	5151d 05h	/amber/
54	Bug fix for bug reported by Botao Lee. The mode bits in the decode stage did not change immediately after a mode switch from a teqp instruction, but 1 cycle later. This meant the wrong set of registers was selected for writing to for 1 clock cycle.	csantifort	5168d 04h	/amber/
53	Cleaned up Amber Verilog, removing unused signals.	csantifort	5183d 02h	/amber/
52	Fixed typo in notes on creating DDR memory interfaces using coregen	csantifort	5183d 02h	/amber/
51	Revert vmlinux back to 48.	csantifort	5224d 02h	/amber/
50	Revert to previous version	csantifort	5224d 02h	/amber/
49	Added a note n how to change timeouts	csantifort	5224d 02h	/amber/
48	Fixed a bug in linux that caused the os to not return to the running application after an interrupt. Hello-world now runs stand-alone again. Added initrd-200k-dhry, a disk image that uses the dhry program for init.	csantifort	5228d 09h	/amber/
47	Changed V6 VCo from 1000Mhz to 1200 MHz	csantifort	5248d 06h	/amber/
46	svn ignore vmlinux.dis and vmlinux.mem	csantifort	5256d 04h	/amber/
45	Store vmlinux.mem and vmlinux.dis in compressed form	csantifort	5256d 04h	/amber/
44	Updated vmlinux image based on last change	csantifort	5256d 04h	/amber/
43	Added support for the flat executable file format to vmlinux, so that the hello-world program is correctly relocated when it is loaded at the end of the vmlinux test. Changed the Virtex-5 clock configuration to use a 1200MHz VCO frequency and 80MHz system clock frequency.	csantifort	5256d 04h	/amber/
42	Added write buffer - fixes bug if wishbone writes takes multiple cycles to complete	csantifort	5274d 01h	/amber/
41	Added instructions on how to use Coregen to create the Spartan-6 DDR3 memory interface.	csantifort	5275d 09h	/amber/
40	Added wishbone bus jitter testing option. Cleaned up waveform log .do files, now seperate files for a23 and a25 cores. Added vmlinux executable elf file for running on hardware.	csantifort	5280d 02h	/amber/
39	Added a second level of buffering to a25_wishbone_buf to fix a lockup bug when write acks to not return immediately, and also to improve performance slightly	csantifort	5281d 03h	/amber/
38	support 128-bit wishbone now used for a25 core	csantifort	5282d 03h	/amber/
37	128-bit wide boot memory module	csantifort	5283d 01h	/amber/
36	Changed boot_mem for the a25 system to be 128 bits wide to match the 128-bit wide wishbone bus	csantifort	5283d 02h	/amber/
35	Amber25 improvements: Use 128-bit wishbone bus, instead of 32-bit to reduce cache miss fetch times Use a fast barrel shifter for shifts between 0 and 4 to improve timing Use a 2 cycle full barrel shifter for complex shifts	csantifort	5284d 09h	/amber/
34	Tweaked strcpy function to speed it up slightly	csantifort	5285d 06h	/amber/
33	Fixed bug in div assembly function. Handles negative numbers correctly. Fixed bug in printf function, negative numbers now print correctly.	csantifort	5286d 02h	/amber/
32	Added clock cycle counting register to test_module to support dhrystone performance measurement	csantifort	5287d 02h	/amber/
31	Added dhrystone benchmark test	csantifort	5287d 03h	/amber/
30	Bug fix - a write access was sometimes dropped when it was in a sequence of writes with variable wb_ack delays	csantifort	5300d 09h	/amber/

Browse

Tools

Subversion Repositories amber

[/] [amber/] - Rev 59

Filtering Options