OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] [vlog/] - Rev 67

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
64 Support latest Xilinx ISE 14.5 software. csantifort 4651d 03h /amber/trunk/hw/vlog/
63 Add support for Xilinx ISim Verilog simulator.
Remove Virtex-6 files.
csantifort 4651d 08h /amber/trunk/hw/vlog/
61 Add new netowkr based boot loader.
Remove support for Virtex. Spartan 6 only now.
csantifort 4938d 02h /amber/trunk/hw/vlog/
60 Bug fix; removed a combinational loop from the a25_decode logic. csantifort 5155d 22h /amber/trunk/hw/vlog/
58 Use TB.clk_count for the decompiler messages and removed the local counter csantifort 5225d 23h /amber/trunk/hw/vlog/
57 Add some debug messages csantifort 5225d 23h /amber/trunk/hw/vlog/
54 Bug fix for bug reported by Botao Lee. The mode bits in the decode stage did not change immediately
after a mode switch from a teqp instruction, but 1 cycle later. This meant the wrong set of registers
was selected for writing to for 1 clock cycle.
csantifort 5242d 23h /amber/trunk/hw/vlog/
53 Cleaned up Amber Verilog, removing unused signals. csantifort 5257d 21h /amber/trunk/hw/vlog/
52 Fixed typo in notes on creating DDR memory interfaces using coregen csantifort 5257d 21h /amber/trunk/hw/vlog/
49 Added a note n how to change timeouts csantifort 5298d 21h /amber/trunk/hw/vlog/
47 Changed V6 VCo from 1000Mhz to 1200 MHz csantifort 5323d 01h /amber/trunk/hw/vlog/
43 Added support for the flat executable file format to vmlinux, so that the hello-world program is correctly relocated when it is loaded at the end of the vmlinux test.
Changed the Virtex-5 clock configuration to use a 1200MHz VCO frequency and 80MHz system clock frequency.
csantifort 5330d 23h /amber/trunk/hw/vlog/
42 Added write buffer - fixes bug if wishbone writes takes multiple cycles to complete csantifort 5348d 19h /amber/trunk/hw/vlog/
41 Added instructions on how to use Coregen to create the Spartan-6 DDR3 memory interface. csantifort 5350d 04h /amber/trunk/hw/vlog/
40 Added wishbone bus jitter testing option.
Cleaned up waveform log .do files, now seperate files for a23 and a25 cores.
Added vmlinux executable elf file for running on hardware.
csantifort 5354d 20h /amber/trunk/hw/vlog/
39 Added a second level of buffering to a25_wishbone_buf to fix a lockup
bug when write acks to not return immediately, and also to improve performance slightly
csantifort 5355d 21h /amber/trunk/hw/vlog/
38 support 128-bit wishbone now used for a25 core csantifort 5356d 21h /amber/trunk/hw/vlog/
37 128-bit wide boot memory module csantifort 5357d 19h /amber/trunk/hw/vlog/
36 Changed boot_mem for the a25 system to be 128 bits wide to match the 128-bit wide wishbone bus csantifort 5357d 20h /amber/trunk/hw/vlog/
35 Amber25 improvements:
Use 128-bit wishbone bus, instead of 32-bit to reduce cache miss fetch times
Use a fast barrel shifter for shifts between 0 and 4 to improve timing
Use a 2 cycle full barrel shifter for complex shifts
csantifort 5359d 03h /amber/trunk/hw/vlog/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2026 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.