Rev |
Log message |
Author |
Age |
Path |
239 |
wide multiplicator added to avoid optimization |
jguarin2002 |
4425d 23h |
/raytrac/ |
238 |
wide multiplicator added to avoid optimization |
jguarin2002 |
4425d 23h |
/raytrac/ |
237 |
corrected errors in raytrac.vhd |
jguarin2002 |
4426d 01h |
/raytrac/ |
236 |
Tunnning delay added to q0 queue |
jguarin2002 |
4426d 04h |
/raytrac/ |
235 |
Tunnning delay added to q0 queue |
jguarin2002 |
4426d 04h |
/raytrac/ |
234 |
raytrac update nothing major |
jguarin2002 |
4427d 03h |
/raytrac/ |
233 |
raytrac sopc component updated |
jguarin2002 |
4427d 04h |
/raytrac/ |
232 |
raytrac sopc component updated |
jguarin2002 |
4427d 04h |
/raytrac/ |
231 |
nfetch address counter implemented in a whole register for convinience |
jguarin2002 |
4427d 05h |
/raytrac/ |
230 |
RC 1.0 Previous rev(228), is functional and even more than this one, but is bigger and is for debugging |
jguarin2002 |
4432d 07h |
/raytrac/ |
229 |
Total RtEngine Hardware, BUT, problems with interconnection... perhaps theres a problem with long path on ssumando5 |
jguarin2002 |
4433d 07h |
/raytrac/ |
228 |
Fixed a BUG where big differences betweeen exponents difference suffered from miss-signedness because of the width of the result was 1 bit narrower, and still its highest significant bit was taken as the sign, in result big differences in where taken as negative results... leading to situations like A+0=0 cause the exponent chosen as the big one was the zero's (-127) leading to an unexpected 0 in the result. The bug was fixed by correcting the signedness of the operation and making the result less narrower in one bit. |
jguarin2002 |
4435d 00h |
/raytrac/ |
227 |
Fixed a BUG where big differences betweeen exponents difference suffered from miss-signedness because of the width of the result was 1 bit narrower, and still its highest significant bit was taken as the sign, in result big differences in where taken as negative results... leading to situations like A+0=0 cause the exponent chosen as the big one was the zero's (-127) leading to an unexpected 0 in the result. The bug was fixed by correcting the signedness of the operation and making the result less narrower in one bit. |
jguarin2002 |
4435d 03h |
/raytrac/ |
226 |
Documento 90%, falta el glosario de siglas, el anexo de referencia de RTLs, el capitulo 9 (trazador de rayos) y la bibiliografia |
jguarin2002 |
4435d 05h |
/raytrac/ |
225 |
Documento 90%, falta el glosario de siglas, el anexo de referencia de RTLs, el capitulo 9 (trazador de rayos) y la bibiliografia |
jguarin2002 |
4435d 05h |
/raytrac/ |
224 |
Documento 90%, falta el glosario de siglas, el anexo de referencia de RTLs, el capitulo 9 (trazador de rayos) y la bibiliografia |
jguarin2002 |
4435d 06h |
/raytrac/ |
223 |
Reportes para NS_JULI_SDF_ASM_AP_DMA_130812_21028 |
jguarin2002 |
4442d 04h |
/raytrac/ |
222 |
documento en un 55\% |
jguarin2002 |
4442d 04h |
/raytrac/ |
221 |
The change in sqrt and inv is about the path of the files with the data memory. dpc has been changed by ap_n_dpc and there was an error on RayTrac related to the load sync chain: the loading of Dot product Operation was being carried out as if it was an unary operation rather than a two operands operation |
jguarin2002 |
4444d 14h |
/raytrac/ |
220 |
ap_n_dpc.vhd es el RTL que integra DataPathControl y ArithPipeLine |
jguarin2002 |
4444d 15h |
/raytrac/ |
219 |
RayTrac: Non tested and witouh TSE |
jguarin2002 |
4444d 17h |
/raytrac/ |
218 |
Raytrac : NS_JULI_DSF_ASM_DMA_120812_18081 : SOPC Library TCL scrip, load it into the Altera Project |
jguarin2002 |
4444d 21h |
/raytrac/ |
217 |
Raytrac : NS_JULI_DSF_ASM_DMA_120812_18081 : \n+ NIOS 2 Standard\n+ JTAG UART | UART | LCD | I2C TOUCH SCREEN\n+ DDR SDRAM | SSRAM | FLASH \n+ Avalon Memory Mapped Master Interface | Avalon Memory Mapped Slave Interface \n+ Direct Memory Access Support \n+ 18081 logic elements out of 24624 (73%) used |
jguarin2002 |
4444d 21h |
/raytrac/ |
216 |
At the moment memblock.vhd described 3 things: an input params queue (discarded, input control is made with master_readdatavalid signal and load_sync_chain) a load sync_chain(implemented in raytrac.vhd) and 4 result queues, which were implemented as a single result queue in raytrac.vhd).\n\n\ncustom_counter and Raytrac_control, are no longer needed |
jguarin2002 |
4445d 12h |
/raytrac/ |
215 |
At the moment memblock.vhd described 3 things: an input params queue (discarded, input control is made with master_readdatavalid signal and load_sync_chain) a load sync_chain(implemented in raytrac.vhd) and 4 result queues, which were implemented as a single result queue in raytrac.vhd).\n\n\ncustom_counter and Raytrac_control, are no longer needed |
jguarin2002 |
4445d 12h |
/raytrac/ |
214 |
At the moment memblock.vhd described 3 things: an input params queue (discarded, input control is made with master_readdatavalid signal and load_sync_chain) a load sync_chain(implemented in raytrac.vhd) and 4 result queues, which were implemented as a single result queue in raytrac.vhd).\n\n\ncustom_counter and Raytrac_control, are no longer needed |
jguarin2002 |
4445d 12h |
/raytrac/ |
213 |
Arithpack: changes to suppport the Beta Raytrac RTL description (with almost DMA caps) |
jguarin2002 |
4445d 12h |
/raytrac/ |
212 |
DPC changes\n\n\t+ established the DCS system rather than the UCA definitively\n\t+ Rather than usign 4 result queues now theres just a single one, of course 4 times wider, this was made to gain simplicity when writing and reading the RTL description that adapts this 4/3/1 word wide result buffer output into a 1 word wide result buffer input\n\t+ Added the Q1 queue to syncrhonize magnitude and normalization ops, managing them to enter at the sime tame rather than different times, formerly it was implemented by setting the normalization and magnitude results into the results buffers at 25th beat and 20th beat respectively, now both results enter into THE SINGLE RESULT QUEUE at 25th beat. This change also forces that Dot product operation to use the Q1 hardware and entering also at beath 25th into the result queue, it could be done in an earlier beatt (in fact in the 19th) but multiplexation logic would have to be added. |
jguarin2002 |
4445d 12h |
/raytrac/ |
211 |
Raytrac Beta 0.1 with Avalon MM Master & Avalon MM Slave Interfaces. Done\! |
jguarin2002 |
4445d 12h |
/raytrac/ |
210 |
Document advance..... towards dma oriented raytrac |
jguarin2002 |
4457d 01h |
/raytrac/ |