| Rev |
Log message |
Author |
Age |
Path |
| 256 |
Sign switcheroo added: a tweek to calculate the distance from observer to sphere impact point |
jguarin2002 |
4798d 13h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 249 |
Using a register as a 66.5 MHZ timer counter |
jguarin2002 |
4823d 08h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 248 |
Corrected an error on the normal |
jguarin2002 |
4831d 14h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 246 |
framework for conditional and accumulative operations DESCRIBED NOT IMPLEMENTED |
jguarin2002 |
4838d 17h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 243 |
The Registers BASE+1, BASE+2, BASE+3 are used now for debugging purposes |
jguarin2002 |
4854d 11h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 237 |
corrected errors in raytrac.vhd |
jguarin2002 |
4855d 13h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 234 |
raytrac update nothing major |
jguarin2002 |
4856d 16h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 231 |
nfetch address counter implemented in a whole register for convinience |
jguarin2002 |
4856d 17h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 230 |
RC 1.0 Previous rev(228), is functional and even more than this one, but is bigger and is for debugging |
jguarin2002 |
4861d 19h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 229 |
Total RtEngine Hardware, BUT, problems with interconnection... perhaps theres a problem with long path on ssumando5 |
jguarin2002 |
4862d 19h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 221 |
The change in sqrt and inv is about the path of the files with the data memory. dpc has been changed by ap_n_dpc and there was an error on RayTrac related to the load sync chain: the loading of Dot product Operation was being carried out as if it was an unary operation rather than a two operands operation |
jguarin2002 |
4874d 03h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 219 |
RayTrac: Non tested and witouh TSE |
jguarin2002 |
4874d 05h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 217 |
Raytrac : NS_JULI_DSF_ASM_DMA_120812_18081 : \n+ NIOS 2 Standard\n+ JTAG UART | UART | LCD | I2C TOUCH SCREEN\n+ DDR SDRAM | SSRAM | FLASH \n+ Avalon Memory Mapped Master Interface | Avalon Memory Mapped Slave Interface \n+ Direct Memory Access Support \n+ 18081 logic elements out of 24624 (73%) used |
jguarin2002 |
4874d 09h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 211 |
Raytrac Beta 0.1 with Avalon MM Master & Avalon MM Slave Interfaces. Done\! |
jguarin2002 |
4875d 01h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 202 |
Working towards a DMA oriented RayTRac |
jguarin2002 |
4886d 14h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 196 |
raytrac+sg_dma+raytrac. Step One, the DPC is transformed. Now there are five instructions (check the design document), theres no full queue sync event, there are only four result queues and only 3 add fp 32 b adders rather than 4. Even it seems like a reduction has taken place, decodification efforts take place when decoding multiplexation from arithmetic blocks towards the resulting queues |
jguarin2002 |
4916d 08h |
/raytrac/branches/fp_sgdma/raytrac.vhd |
| 186 |
Sopc claims that int is a name that conflicts with verilog or vhdl standards, so a change on the int port was made by renaming it to irq |
jguarin2002 |
4941d 17h |
/raytrac.vhd |
| 181 |
Version beta 0.2 previo a conexion con bus avalon en QSYS/SOPC |
jguarin2002 |
4942d 19h |
/raytrac.vhd |
| 177 |
Interruptions separated in diferent output ports, so we can assign them as interruptions senders.... each one of them..... |
jguarin2002 |
4967d 07h |
/raytrac.vhd |
| 172 |
Results fifo writing signals added to the testbench |
jguarin2002 |
4979d 06h |
/raytrac.vhd |
